5Speed Parts need your help Cb7TUNERS!!

[Cb7xChun]

Well i got most of the stuff today just tell me what else im missing. i am aiming for this project to be done next weekend.

pics:









i have the clutch master cylinder i just forgot to take a pics of it

i got these for a steal
Skunk 2 Springs FTMFW!!

[93accdpj]

If you are planning to hook up the clutch switch,While you have all the pedals out go ahead and replace the pads that activate the clutch switch and brake lights. The brake light isnt that bad. if the pad falls out of the pedal you can easily put another one in. If the clutch switch button falls out on you, you have to pull the whole pedal assembly to fix it. Just go ahead and pop yhe rubber pad out of it, and epoxy a penny on it.

[MR.PHIL]

http://www.cb7tuner.com/vbb/showthre...=&threadid=588

[TypeG]

chun, hit me up if you want me to come by and help out. later.

[90_cb7]

damn dude....you had to wait until it was cold as hell to buy this stuff didn't you lol. let me know when you are doing it and i will see if i can make it down there

[slick]

your missing the whole clutch line. i see you got the master cylinder and slave but you need the lines in between maybe a new clutch and flywheel that all i see and remember you missing.


are you going tot use the prelude mount thats on there?

[excalibur02]

you need the plug/wiring for the clutch pedal unless your doing an s2000 engine start button.

Intermiedate shaft
5spd axles
newclutch/pressure plate
new/resurfaced flywheel
release bearing
release fork?

[slick]

cannot believe i forgot that stuff and im just finished with my swap, but i had a parts car so it had all the parts pretty much

edit you only need the driver side and intermediate shaft no the passenger its the same

[Cb7xChun]

you need the plug/wiring for the clutch pedal unless your doing an s2000 engine start button.

Intermiedate shaft
5spd axles
newclutch/pressure plate
new/resurfaced flywheel
release bearing
release fork?

how serious is it not having replace the shafts and axles?

[Cb7xChun]

your missing the whole clutch line. i see you got the master cylinder and slave but you need the lines in between maybe a new clutch and flywheel that all i see and remember you missing.


are you going tot use the prelude mount thats on there?

anything wrong with the prelude mount?

[accordaffair]

I have the clutch lines I'd be glad to sell them cheap

I bought them but got scammed out of the rest of the parts I needed and never went through with it

[Cb7xChun]

I have the clutch lines I'd be glad to sell them cheap

I bought them but got scammed out of the rest of the parts I needed and never went through with it

i need them by this week, i plan on doing it this weekend

[accordaffair]

I could send them tomorrow if I had cash in hand, stuart to ATL isn't terribly far but I don't know how long it would take UPS to ship it...we'd have to do air mail or something to guarantee it, like I said I'd be glad to sell them, they are taking up space for no good reason

[Cb7xChun]

I could send them tomorrow if I had cash in hand, stuart to ATL isn't terribly far but I don't know how long it would take UPS to ship it...we'd have to do air mail or something to guarantee it, like I said I'd be glad to sell them, they are taking up space for no good reason

i doubt it make it this friday/saturday but if things dont work out for this weekend ill give u a pm

[accordaffair]

ok cool