hey guys just thought i would post up some work i did tonight in 14 degree weather
this is what i am working with
headers are new in this pic but i had them on my sedan and not in this condition now lol
i have a 22" resonator and an 18" resonator that i would like to use
here i cut off about four inches of pipe and the flange from the down pipe
i plan to mate my 2" diameter down pipe with my 2.5" cat
the notch in the hanger is what i plan to trim to make more room for my resonators
hanger trimmed and cleaned
mocked up
i did get this piece welded up but no pics tonight but will post them tomorrow
FYI i am using a harbor freight $90 dollar special that is about 4.5 years old. my liner was so cold when welding that the wire could not be fed at a steady pace and was so stiff it could hardly bend at all.
i had to keep it straight as possible and could only weld in the overhead position.
this is what i am working with
headers are new in this pic but i had them on my sedan and not in this condition now lol
i have a 22" resonator and an 18" resonator that i would like to use
here i cut off about four inches of pipe and the flange from the down pipe
i plan to mate my 2" diameter down pipe with my 2.5" cat
the notch in the hanger is what i plan to trim to make more room for my resonators
hanger trimmed and cleaned
mocked up
i did get this piece welded up but no pics tonight but will post them tomorrow
FYI i am using a harbor freight $90 dollar special that is about 4.5 years old. my liner was so cold when welding that the wire could not be fed at a steady pace and was so stiff it could hardly bend at all.
i had to keep it straight as possible and could only weld in the overhead position.