Getting wheels redrilled?

[J-specCb4]

i guess.... i see that being a problem as well but i dont see why we all dont just buy wheels that fit our cars.... they are actually about as available as 4x100 u just have to know where to look.

[GHOST 2.2]

just do a 4x100 conversion

could be worse....a 4 to 5 lug conversion.

[bruno8747]

The machine shop up here will actuall weld up the existing holes then redrill to whatever specs

I can do that too, But the thing is, When you weld up the holes thats just a filler, The wheel can warp if not careful.

[skilzz]

look man your life rides on those four wheels somtimes at speeds greater than 100mph... do you really want to take the chance of losing a wheel at these speed? dont play with your life dude

[Mista Juice]

if you do happen to do it, do it the right way and get the current holes filled and then get them redrilled as mentioned above..

[gloryaccordy]

I like that fill and drill deal. Speaking of which...

[Julianachos]

Do like they do in Puerto rico, Redrill the hubs to 5 lug and slap them back on.

SO THAT'S HOW THEY DO IT.
I always thought they did it, the proper way. Guess not.

[wed3k]

look man your life rides on those four wheels somtimes at speeds greater than 100mph... do you really want to take the chance of losing a wheel at these speed? dont play with your life dude

who's going 100mph?

[skilzz]

who's going 100mph?

even while driving at the limit losing a wheel can put you under a semi in the opposite lane

i just said 100 because i know ppl drive there every now and then (not saying every does.. but then again wats the sense in spending money to make your car go faster then only drive at the limit ALL the time)

[wed3k]

even while driving at the limit losing a wheel can put you under a semi in the opposite lane

i just said 100 because i know ppl drive there every now and then (not saying every does.. but then again wats the sense in spending money to make your car go faster then only drive at the limit ALL the time)

sometimes driving well isnt all about speed.

[sackingz123]

who's going 100mph?

the typical honda driver

[skilzz]

the typical honda driver

[starchland]

i dont think its safe. a good wheel is designed to properly support where the lug comes into contact and distribute evenly...but if you start drilling and putting load where its not designed to go...