If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
so take it apart new head gasket and take the pan off and look at the rods and crank. measure run out and if its within spec throw it in a car and even if it doesnt run, you can part the motor out and make back more than what you paid for it.
so take it apart new head gasket and take the pan off and look at the rods and crank. measure run out and if its within spec throw it in a car and even if it doesnt run, you can part the motor out and make back more than what you paid for it.
inspect and re-torque the rod bearings...very important on h22's or any jdm motor since they havent been ran in a couple of months to a year.
I <3 G60.
0.5mm Oversized Stainless valves and bronze guides available. Pm me please.
Comment