GhostAccord : 1996 Honda Accord EX

[Boost_Lee]

Very nice! I love that DIY EPM!

[GhostAccord]

Updated with a few pics in second post. More to come!

[sonikaccord]

In for pics...don't make us wait.

[GhostAccord]

Oh there are lots of pictures to come. The two reserved posts are for images.... �� I have to take some time to go through them all first....

[af_1132]

Even though you are going to do most of the detailed updating in your blog, I hope you populate your summary posts here with pictures

[GhostAccord]

and More.......

[GhostAccord]

Intake Manifold & Throttles

GSXR 46mm vs Ducati 54mm



Go to my blog for the full Build











Ignition

Engine Position Module (EPM) made out of a stock F22 Distributor.









Coil Over Plug (COP)
This is the original setup using Suzuki pencil coils. My new setup is the same configuration only it is using the smart coils from a K24 Accord.



Cylinder Head & Vale Train


F22A6 Cylinder Head Porting

Intake


Exhaust


Combustion Chamber


Valve Train






Engine Block

Sleeves, Rods and Pistons


Polished Pistons


Waiting to send the block and all its parts out to the machine shop soon!



Header & Exhaust System

Header
As it sits now.....



Exhaust





Cooling System


Yonaka 2" Core 1/2 Rad w/Maradyne 13" Slim Fan

Decided to make up an aluminum bracket for mounting the slim fan...zip ties aren't as cool as people think!




Fan itself never touches the rad and it is mounted using rubber isolation bushings




Remote H22 Thermostat

This will be mounted somewhere on the frame rail.

Drilled and tapped for AN fittings




Next step is welding 20 AN bungs onto the inlet and outlet. I will be welding all of my aluminum components at the same time...


Suspension & Steering

Fresh paint and busings






Swaybars and brakes

[GhostAccord]

by GhostAccord

ENGINE, 2.4L F22B2/A6 w/Individual Throttle Body Induction

EXTERIOR, In process - Highly Modified - Images and specs to follow

INTERIOR, In process - Fiberglass w/Race Trim - Images and specs to follow

SUSPENSION/WHEELS - Race Modified - Images and specs to follow

AUDIO/ELECTRONICS - 1996 JVC cassette deck with a couple beat up 6x9's..... anything that won't be loud enough to hear over the sound of my engine!

FUTURE PLANS - Lots, stay tuned and you can see for yourself!

Well I broke down and finally decided to add a members ride thread to CB7Tuner for my aptly named "GhostAccord" Build. I will most likely post up the initial information about the build and then post small link/posts when I do my blog updates. Hope that's OK????

I will skip the beginning, as I started with a set of 01 GSX-R1300/1000 throttles that ended up being way to small for my engines specs. 46mm throttles are a bit small for a 2.4L engine. So I decided to use a set of Ducati 999r (shower top) throttles. I had to buy 2 sets as the Ducati is a twin..... 54mm at the throttle plate will be perfect for my build.


by GhostAccord

Base

Model - 1996 Honda Accord EX
Engine - 2.2L SOHC Non VTEC I4 (F22B2)
Body - Sedan
Colour - White

Build

Engine

Intake Manifold/Induction System
• Ram Air Hood
• Fiberglass Air Box
• 4 x 54mm Ducati 999r Shower Top Throttle Bodies
• Custom F22A* Intake Flange Adapter Plate
• Thermal Gasket

Ignition
• K24 COP Upgrade
• Custom Engine Position Module

Fuel System - 2 Stage
• DeatschWerks 300LPh Fuel Pump
• AEM Fuel Filter
• -AN Fuel lines
• Stock F22A Fuel Rail
• AEM Electronic Pressure Sensor
• 1st Stage - Port Injected, DSM 450cc Peak & Hold Injectors
• 2nd Stage - Shower Top Injected, 240cc Ducati Saturated Injectors

Cylinder Head & Vale Train
• KMS Titanium Retainers
• Manely 7° Locks
• KMS Valve Springs
• Custom Ground Camshaft (Delta)
• AEM Camshaft Gear
• 34mm Ferrea Intake Valves
• 30mm (+1mm) Ferrea Exhaust Valves
• Race Port & Polish

Block
• Modified F22 Oil Pan (Tucked for header clearance, and stretched for increase oil cap. & baffles)
• F22A6 Stock Windage Tray
• Stock F22B2 Oil Pump
• ARP Main Studs
• OEM Honda Bearings
• Carrillo H22 Pro A Rods
• Wiseco Custom Slipper Skirt 89mm Pistons
• Darton M.I.D Sleeves
• ARP Head Studs
• Cometic 89.5mm MLS Head Gasket

Header & Exhaust System
• MAC Kustoms Tuned length, 3 Step, 4 - 1 header w/Merge Collector
• KTeller Mandrel 3" Stainless Pipe Kit
• Magnaflow Resonator
• Vibrant StreetPower Stealth Muffler

Cooling System
• -AN Braided Hoses and Fittings
• Yonaka 2" Core 1/2 Rad w/FFC Billet Mounts
• Maradyne 13" Slim Fan
• Meziere 35gph dual stage Electric Water Pump
• H22 Thermostat Housing/remotely mounted

Transmission & Clutch
• Stock F series Trans
• Quaife Helical LSD
• Fidanza 8.5lb Aluminum Fly Wheel
• Fidanza 2.3/4 puck clutch kit

Suspension & Steering
• DIY Manual Steering Rack
• Energy Suspension Poly Bushings Front and Rear
• Suspension Techniques Front and Rear Sway Bars
• KYB AGX Struts
• Skunk2 Racing Springs
• 17" Drag DR19 Gold w/Cooper 225/45R17 tires.

Brakes
• Xenocron Brake Booster Delete Kit (w/Wilwood Brake Master Cylinder & CNY Performance aluminum adapter plate)
• ROH V6 Caliper and Rotor Upgrade
• Stainless Hard lines w/Wilwood braided flex lines.
• Rear Disc Swap
• Adjustable Proportioning Valve

Body
• Xenon 4pc kit
• Ram Air Clam Shell Hood
• Shaved rear doors and trunk
• Active Spoiler
• Rear Fender Flares

pics to follow!