window problem

[Gecko1]

Hi, fellow members i have a problem with my drivers side window the story is that when i bought my car it belonged to a young girl that ran into a light post and bent the door in really bad ( i have no idea how ethier) anyways not when i roll down my window it goes down fine but when i roll it back up it messes up and it seems like it in croocked and doesn't close right so i have to help it go up and then fix so it cloes right ....but lately it does not want to go down anymore its like its stuck on something but then 10 min late it goes down fine can anyone help me out i need to fix before summer comes

[konig52r]

well i kinda have the same problem. my window goes down like 1/4 and if i try to go any further it gets stuck and i have to wait like a day so i can get it to go up again. im thinking it might be the switch. maybe thats whats wrong with yours. i could be wrong though, so if anyone knows please help

[Gecko1]

at first i thought the same thing but it will go down fine and up but it fells like its caught on something....

[BigDawg916]

i would replace your window regulator and check the outer applica on the back side of the door to make sure the retainer is still intact for the window. have the same problem but since i work at a body shop doing the same thing on other cars all day i just to lazy to put my new one in LOL

[randomcustoms]

i also have a problem with mine when goin back up, it kicks sideways just a lil and tries to come outta track and i have to hold it in the back so it closes right.

[1991f22a1]

my drivers side window would only roll down about 2 inches, then make a nasty noise like something was jammed. i ended up going the JY and pulling a regualtor/motor. it turns out the motor was the problem, so i just switched motors. one cause could probably the wires, another might be that the teeth on the regualtor are broke off, which was the problem with the one i bought at the JY, thats why i just used the motor. pull it out and check to make sure the teeth are all still there, if thats fine, try replacing the motor.

[1clean92]

i am having the same problem.. just check the guides... i checked my motor and regulater and they are fine.. i just need to situate the guides and lube them

[my 9t9d]

My peeps I tOo have experienced that issue and this is what a mechanic told me
After some time the seal that goes around the window will stretch due to non lub
So thus resulting in a bundle when the window goes up he said replace the seal
and make sure its latched from a hook that is inside of the
Door. So I replaced it and now it works fine

Now bout the down motion the problem could be that the
window relay is broken. there is a small plastic part at the
top of the real for the wire to slide well its plastic
And the wire isn't so in time it becomes a saw and starts to
cut the plastic. it begin to get stuck here's the trick I used pull
the window up when you want it to go up and down when you
want the window to go down.
But I'd just replace it.

[IridiumCore]

Window

Ok so I think I have the same issue.

But mine will go up and down just fine. The regulator has a good amount of fresh lube (done today) and I get still a crooked window when it's all way up heres a pic. Any ideas, my regulator is not bent and the teeth are there and not worn badly.