What can I used to possibly make an front and back lip for my car? Not everyone is made of money so let me know.
-
-
there has been some ppl that used Garden trims and plastics from home depot and stuff to make lips.. others used sideskirts to mold into a rear lip (Like CB7_91/DX - Very nice and clean CB7 with his own unique rear back lip)..
CB7_91/DX - Rear Lip
-
go home depot. garden trim. or oem.
MEMBERS RIDE.
Bought from: DannyD
, Night Wolf , CB7=91, lummieCB7
Sold to: LITuner, rezist09, Pacman91EX, 93AccordLXwhite, PhatAccord, TheNextEpisodeComment
-
Comment
-
theres a way using the garage door bottom seal, you can make a lip with that
something like this:
Comment
-
cheapest good looking way.Originally posted by JACCORD01 View Postthere has been some ppl that used Garden trims and plastics from home depot and stuff to make lips.. others used sideskirts to mold into a rear lip (Like CB7_91/DX - Very nice and clean CB7 with his own unique rear back lip)..
CB7_91/DX - Rear Lip
Comment
-
wat did he use?Originally posted by ikayto View Postclicky the siggy!!!
ARCADIA GREEN MEMBER #20
AIM=SleepygreenCB7
Yahoo=annamaineeak@yahoo.comComment
-
bent a 6th gen accord sideskirt with a heat gun i'm assuming.Comment
-
CG3 HONDA ACCORD COUPE 2001 SIDE SKIRT MODDED AS A REAR LIPOriginally posted by sleepygreen View Post
Im assuming with heat and bending ?Comment
-
You can also make Homemade lips out of Fiberglass. This is a G-Square Copy I made using Fiberglass materials.
I am the Yakuza CB7!JDM 96spec H22A 178HP 149TQ
"The JDM Fleet"
1993 Accord Sedan - 2.2 JDM H22a1994 Prelude V-Tec1999 CL 3.02000 Prelude2010 Accord Crosstour - 3.5
1993 Mirage S Sedan - 2.0 4G63 Project Evo 2.51994 Mirage S Sedan - 1.5
1991 Isuzu Impulse RS - 1.6 AWD Turbo1993 Asuna - 1.8 "CDM Impulse XS"
1993 Sentra SE-R - 2.0 SR20de1995 200sx SE-R - 2.0 Sr20veComment
-
but you need an actual gsquare to make a mold rite?Originally posted by Warudakumi View Post
You can also make Homemade lips out of Fiberglass. This is a G-Square Copy I made using Fiberglass materials.clicky the siggy!!!
ARCADIA GREEN MEMBER #20
AIM=SleepygreenCB7
Yahoo=annamaineeak@yahoo.comComment
-
Yeah I used the actual G-Square to make the mold, the original is in the background next to the bumper. My intent was to make a copy and drive around with that coz I didn't want to break the original otherwise I'd be so pissed. If the copy breaks.... it'll be a pain in the ass to make a new one, however at least I can make as many copies as I want coz the original will always be intact. Some JDM parts for the CB are too rare to break and I learned from breaking one part that will never be made again from EGR (rear roof window spoiler)Originally posted by sleepygreen View PostLast edited by Kurobei; 10-20-2009, 06:51 AM.
I need a custom turbo manifold built....
707 NorCal NinjaZ
Honda Twincam Motorwerkz?
"I am the Yakuza CB7!"'92 Accord Sedan SiRComment
-
now is that front or back lip?Originally posted by Warudakumi View Post
You can also make Homemade lips out of Fiberglass. This is a G-Square Copy I made using Fiberglass materials.
Under Ground Society
"SLUTS NEED LOVE TOO.....AND A LOT OF DICK!"Comment
Comment