fitting XXR 527s 18?

[islandhopper]

...

because race car

i see what ya did there..

[i-07]

i've had some odd setups like my 195/60r15 on my 15x7 jeep rims but soon i will have either 225/45r17 or 215/45r17 on my 17x8.5 45 offset rims. i had wanted to do the xxr 527's with 215/45r17 the 17x8.25 rims 25 offset would work but would still need to roll the rears on the wagon

[Ravens_CB7]

i've had some odd setups like my 195/60r15 on my 15x7 jeep rims but soon i will have either 225/45r17 or 215/45r17 on my 17x8.5 45 offset rims. i had wanted to do the xxr 527's with 215/45r17 the 17x8.25 rims 25 offset would work but would still need to roll the rears on the wagon

yeah i decided to go less wide and bigger positive offset between 35 and 40......still 18s though

[i-07]

yeah i decided to go less wide and bigger positive offset between 35 and 40......still 18s though

do a 35 offset with 7.5-8.5 width

[deevergote]

7.5" is fine. I was barely dropped on H&R Sport springs, running a 7.5" wheel (+38 or +42, I can't remember... but a "proper" offset for our cars) and I still hit the inner fender lining at full lock.

[i-07]

yeah i will need to roll the rears on my car

[Ravens_CB7]

7.5" is fine. I was barely dropped on H&R Sport springs, running a 7.5" wheel (+38 or +42, I can't remember... but a "proper" offset for our cars) and I still hit the inner fender lining at full lock.

Yeah that's what I thought too, the only thing is that if this rims keep the concave look don't matter the offset or does it change with the offset, like if its a +44 it would be flat???

[i-07]

Yeah that's what I thought too, the only thing is that if this rims keep the concave look don't matter the offset or does it change with the offset, like if its a +44 it would be flat???

yeah it depend on offset and width

my 17x8.5 45 offset

[deevergote]

Yeah that's what I thought too, the only thing is that if this rims keep the concave look don't matter the offset or does it change with the offset, like if its a +44 it would be flat???

The offset determines the location of the hub mounting point in relation to the center of the "barrel". I'm not sure what offset would make for a completely flat face, to be honest, or if that would change by wheel width.

[Ravens_CB7]

The offset determines the location of the hub mounting point in relation to the center of the "barrel". I'm not sure what offset would make for a completely flat face, to be honest, or if that would change by wheel width.

Yeah its cuz I remember someone here mentioned that some wheels keep the concave even when the offset of the wheels change but I'm not sure if that's true....

[Ravens_CB7]

yeah it depend on offset and width

my 17x8.5 45 offset

Those wheels look sweet bro

[Cb7PuertoRico]

those rims look sexy...

[swk_cb7]

so much hate!!! well i say 18" on cb's looks like dodo. I think you should go with the 17x9.75

[Ravens_CB7]

so much hate!!! well i say 18" on cb's looks like dodo. I think you should go with the 17x9.75

well thats your point of view and i respect that but for me its not that bad, now i rather have big wheels and be a little higher from the floor than be with small rims, slammed and braking the life out of my car hitting hard on pot holes and what not, because the L.A roads suck big time

[flatrex]

Yeah that's what I thought too, the only thing is that if this rims keep the concave look don't matter the offset or does it change with the offset, like if its a +44 it would be flat???

The lower offset have more concave the higher offset will be more flat looking