US Amps Question??

[StinkinLincoln]

Hey guys I've been doing some looking and after days I'm stuck...Mostly Because I'm a Nubie at the sterieo stuff.. I've had a couple systems but nothing sound Comp worthy.. Which is what my gool is with my current CB7 prodject...NE Ways..

The set-up in short so far is....

1 RE Audio SX 12' Subwoffer.. (The 2 ohm model I'm guessing)
- 1000 Watts RMS

1 RE Audio Ported And Tuned BOX (Hope It Fits)

Now For The Amp I Know I Want To Use US AMPS But I Need To Know What One Is Best For My Set-Up...

US Amps MD-1D or US Amps MD-2D????

[jobab06]

i just brought a 12" Re se a couple weeks ago the 2 ohm model man its probably one of the best subs i have ever owned and i built the box myself ...i need to wait a while before i get a new amp but i was looking at hifonics... or one of them us. audio amps...

[doughboy415]

I talked to my stereo shop, they say it all depends on what you guys want to do,compete or just have a nice system,He says the Us amp 2d or american bass vfl line 80.1 or 100.1 for the re sx sub. For the se he says the same us audio or American would be good choices,the sq line in American bass, us audio it all in what application you want,either ax or md series would work.

[guitarplayer825]

I'm looking at a US Amps XD-2000D and two RE Audio SE12 DVC4, sound good?

[StinkinLincoln]

yea I really am digging the SX's !!! I want to be loud!!! But not Full COMP.. Like daily Driver with a touch of Nasty..

So The MD-2D model looks like my choice for Amp so far.....

So you guys thing I shounld buy the 2 ohm RX Sub or the 4 ohm model.

Just finished my Trunk and 10 Dollar AEM Intake..So The SYSTEM is next!!

[hondaacc91]

sundown 3000D

[StinkinLincoln]

Yea there so many good amps out there its hard to say which is the best but I think I'm going to give US Amps a shot...There sposed to be really good...

So the rms on a 2 ohm RE Audio SX 12" Sub is 1000 watts and the US Amps MD-2D rms at 2 ohms is 1000 watts...So it seems to be a good match ??

[guitarplayer825]

Is it a dual or a single voice coil 2ohm?

If the sub is a SVC then go with a 2ohm and if it's a DVC then go with a 4ohm and run the voice coils in parallel to achieve a total impedance of 2 ohms.

[StinkinLincoln]

I think its SVC but im not sure..I'm going to do some searching...

If it is I want the 2 ohm to run 2 ohms off my single amp...Right?

Not a 4 ohm SVC on 1 Amp..

I only want to buy this stuff once...lol

[doughboy415]

I didnt know if you guys actually knew this or not,but RE and US amps are the same company,Us amps makes the RE subs

http://www.usamps.com/home.html

[StinkinLincoln]

Yea..I Know...LOL

[loud92CB7]

we have done a ton of them with a memphis 1000d and the 1500 depending the model. but if ur gonna keep it all us amps based then do the 2d. better to have power to spare then the lack there of also build your on box. tune LOW make your nutts jiggle

[StinkinLincoln]

we have done a ton of them with a memphis 1000d and the 1500 depending the model. but if ur gonna keep it all us amps based then do the 2d. better to have power to spare then the lack there of also build your on box. tune LOW make your nutts jiggle

Yea I Love When My Nuts Jiggle!!

[StinkinLincoln]

So it look like the SX Series Sub's Are DVC..So if I only run 1 sub off of 1 Amp Do I want her 4 ohm model?? Or the 2 ohm Model??

Need Some Help!!!

Oh and the amp is the MD-2D Model I'm talking about...

[loud92CB7]

2ohm model FTW. that amp does 1.5-1.7 with proper voltage it would be a killer little single sub setup.....