how to do the brake

[93accord-se]

i trid to find a diy on how to change the brake but i did not find anything can anyone help me plz

[newtuner7]

just want to change pads or what man there is a lot of different components to the brakes

and this isnt off topic this is technical

[deevergote]

Take it to a shop.

[93accord-se]

just want to change pads or what man there is a lot of different components to the brakes

and this isnt off topic this is technical

yes i just wantto do the brakes pads

[93accord-se]

Take it to a shop.

i would but i do not have the money

[accord2nr81]

jack car up
take tire off
take brake mastee cylinder cap off
take 2 slidepin bolts out of caliper "12mm"
take caliper off and pads out
push caliper piston back
put pads back in grease brakepadlinning plates where it hits the caliper
grease slidepins put caliper back on put your brake fluid cap back on
step on brake pedal till brake gets tight again
wheel back on
your done

[newtuner7]

thats pretty much it

[F20A CB7]

I WOULD use a C clamp , and the old pads to push the pistion bak on the caliper!

[accord2nr81]

i use a c clamp to push the piston back in but i guess you can use it to press the pads back together... long as you put the cap back on the fluid before you press the brake pedal you should be fine without having to bleed the system

[accord2nr81]

f20 cb7 you editied on me :P

[newtuner7]

lol yea he did i was wondering about his post... you shouldn't have to use a c clamp as it should push in but sometimes they wont

[deevergote]

I always use a C clamp.

[turboaccordlx]

pads or rotors?

[accord2nr81]

yea rotors are a different storie
have to take off the caliper bracket 2 17mm bolts and 8 more bolts if you wana do that... 4 in the center of the rotor on the front and 4 in the back... unless you got the speacil tool theres a diy on that for sure ive seen it

[NAiL05]

Or you can just take it to honda and let them use the on car lathe and you dont have to take anything apart!