0-60

[ssanc153]

was with a buddy and ran a 0-60 maxing out gears to about 6k RPM, got 13.7 secs. this normal or need some work? mostly stock f22a1 cold air intake and auto tranny

[Opticon]

was with a buddy and ran a 0-60 maxing out gears to about 6k RPM, got 13.7 secs. this normal or need some work? mostly stock f22a1 cold air intake and auto tranny

that time is pointing to stockish but still good for an automatic

[MikeW]

Coupe or Sedan?

I always thought, even with a few bolt-ons, it was hard to get our cars below 15sec...

Now you got me thinking and ima hafta get out and time myself now

[tn_accords]

to me that sounds really good for just a bolt on !! that tranny must shift really smooth and fast and have good traction. if it runs that good then just do minor stuff like tune up and exhaust and header and upgrade to H23 IM with an A6 cam and PT6 ecu !!

[JohnD1079]

wtf are you talking about 0-60mph or Quarter mile?

[ssanc153]

this was a 0-60 test, it was is a 4 door anniversary edition. i was pushing the gear in my self and had the gas on the floor, only let up to let car shift when i told it to. are these good numbers? 30-60 was 9.7 seconds. also wanted to know where that DIY and parts list for the f22a1 is. the one where you put the h22 IM f22a4 headers and f22a6 parts?

[Losiracer2]

idk, i do 9 sec 0-60 and prob. 17 sec. 1/4 mile at like 80. Its prob. quicker now, since I've added H23 TB/plenum and forged lightweight wheels. Oh I've got all the bolt ons though. I'm an auto EX coupe 93

[MikeW]

ssanc, you mean you were manual-shifting your Auto and letting up shift

Losi, the bikerack might be adding some drag, slowing ya down too....

[ssanc153]

i was manual shifting my auto

[Losiracer2]

ssanc, you mean you were manual-shifting your Auto and letting up shift

Losi, the bikerack might be adding some drag, slowing ya down too....

haha yeah, whenever I drag, or am not in school, I take it off for that streamline look and better mpg.

[tn_accords]

this was a 0-60 test, it was is a 4 door anniversary edition. i was pushing the gear in my self and had the gas on the floor, only let up to let car shift when i told it to. are these good numbers? 30-60 was 9.7 seconds. also wanted to know where that DIY and parts list for the f22a1 is. the one where you put the h22 IM f22a4 headers and f22a6 parts?

Well here is a parts list

Complete H22 or H23 or F22B DOHC IM preferable with the IAB box
a4 or a6 Header .. tubular design
a6 Cam and cam gear
PT6 ecu

That is what you need plus the gaskets to both manifolds.

To do this all you need to do is swap intakes and exhaust manifolds. Unbolt one and put on the other. IF you want to run the IAB's properly you need the black box under the intake and run the the vacum lines and then run the wires to the ecu. ITs better explained in the swap sticky thats in the Swap section of the forums. Its a very straight foward swap.. no modifications needed. You might want to get a valve adjustment for the a6 cam !!

[rexload]

was with a buddy and ran a 0-60 maxing out gears to about 6k RPM, got 13.7 secs. this normal or need some work? mostly stock f22a1 cold air intake and auto tranny

I think something is wrong with that time. 0-60mph in almost 14seconds?
You either didn't time it right, or you have a 500lbs audio system in the trunk, or your engine is in very poor condition.
A stock Accord should be able to do 0-60mph in 9.0-10.0 sec. With a few bolt-ons and good driving it should definately be UNDER 9sec for 0-60mph.

EDIT: just realized you have an AUTO, not sure about auto times but I still think that it should be within 1.5sec of a manual.

[NAiL05]

lol 14 seconds is NOT fast for 0-60. But as rexload said lol. I know manual will do around 9 sec if not faster. Auto a bit slower.

[foamypirate]

was with a buddy and ran a 0-60 maxing out gears to about 6k RPM, got 13.7 secs. this normal or need some work? mostly stock f22a1 cold air intake and auto tranny

I run 0-60 in 9 seconds with an Auto F22A1, but I also have an H23 Intake Manifold, extra IAB spacer, IAB's connected properly, 2.25" catback exhaust and a PT6. Stock intake and auto tranny though.