DC.. megan racin... gt racin... whats the best... headers... any other brands u guys recommend
-
-
bisimoto....but they're custom hand built and cost coin. They're works of art really.Originally posted by horhey1220 View Post
member's ride thread
93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
91 Accord SE 176k
97' Honda Odyssey 199k miles...$485 spare van for my parents -
-
Some? What do you do with the others?
Bisimoto is the only header worth a damn for the F22A. Everything else provides such minimal gains that they're really only good for looks. You can weld a larger collector on a cheap header for more gains, but it won't really be worth the effort...
Comment
-
Well for someone who doesn't have $1000 to blow on a header, is a off the shelf 4-2-1 header better than a LX manifold?Comment
-
According to a thread somewhere around here, the F22A4 header can be put on the F22A1 engine for increased performance. You can get that header from an EX model.Originally posted by Accrdwgnguy View PostComment
-
What motor are you running? F or H?Comment
-
-
yes i have the A4 header on my A1, its a direct bolt on along with the downpipe to the A1's cat...its good for wat...5 hp?Comment
-
I'll buy a generic ebay header for $60 shipped b4 I buy a rusted up A4 header for more. I live in the northeast after all.Comment
-
An A4 header can be had at a junkyard for $10... and it's better material than the cheap shit they make those crappy inexpensive headers out of. It's also less likely to leak, crack, or fit poorly.Originally posted by Accrdwgnguy View Post
If you don't have $1000 to blow on a header, but still want performance... get something else. A $100 header isn't going to give you $100 worth of performance. Do it for looks, if you want... but not for performance.
For $100, you can get a Delta cam regrind. You can get an Unorthodox Racing pulley. You can get a pair of Blacktrax intake plenum spacers (ok, a little more... but close enough)
Comment
-
Comment