Rotors

[DrSzSoLDIeR]

did u guys install them urselves or did u pay for them? n if u did pay for them dem how much did u pay?

guy tried to charge me 140...is dis a good price or is it 2 much???

[alb_accord]

$140 for the entire job is a bargin. usually they charge $300 for a rotor job on accords.

you might do it ur self. there is a few diy in here. check it out...

[jst_4_kiks]

i usually go to autozone for all my parts........mid grade or the best they have is what i get.....but one thing with brakes......dont do just pads and leave the rotors or vise versa........if doing a brake job, replace ROTORS AND PADS.... kinda like a matching set kinda thing.......better braking too when they are replaced the same time.........good luck in your repair......

[DrSzSoLDIeR]

how much am i looking at spending for buying front and back rotors of a good quality w/ and w/o brake pads??

[dee88]

Yo Chris where do you get your work done at? I'm just curious

[quaidum]

i usaully take my whole steering knuckle off and bring them to my mechanic i think he charged me 20 bucks each he took 4 bolts off the wheel bearing and 4 bolts of the hub assembly and separated them he didn't even use a press like i thought he would saves a lot of money doing it this way

[quaidum]

how much am i looking at spending for buying front and back rotors of a good quality w/ and w/o brake pads??

i have a level 4 undercar discount at advance auto parts and to replace my front rotors, calipers, and pads was about 175 -200 i think it might have been less or more

[JesterMasque]

Numbers are straight from AutoZone.com for my reccomondations:

Front Pads- $54.99
Front Rotors- $43.99 x2
Front Hardware Kit- $9.99
Total + 8.5% tax (Your tax may vary) = $165.96 (Parts)

Plus, if you are mechanically inclined, about 2 hours. If you have a DX, I'm positive you don't have rear disc unless it's a mod and your rears should be checked before you even think about buying/resurfacing shoes and drums (the rears are so easy to check too so...). More than likely, they will be just fine.

If you're not likely to do this yourself, about $150 for the labor of changing pads and rotors sounds almost ok, but you will pay a ton in parts markup unless you buy them yourself. If you buy them your self you're looking at about $300-330 (if the shop even lets you do that). If not you're looking at upwards of $400 for sure.

[DrSzSoLDIeR]

Yo Chris where do you get your work done at? I'm just curious

dog ive be goin to mad different placesz n ppl always tell me different shit so im starting to not give a fuck where i go ne more

[dee88]

I know of a few good places, honest ppl to bro.

[DrSzSoLDIeR]

I know of a few good places, honest ppl to bro.

where