ebay headers

[cb7coupe21]

anyone using ebay headers on their cbs and are thay any good??

[ExplodingCake]

Ebay does not make header.

Generics are this and that , some have good experience , some have bad experience.
I would save more $ to get Megan Racing ones.

[nine_deuce]

I had a no-name header I got from eBay on my f22, it was great. Got another one for my h22, it's not on yet, but, I have no complaints

[JunyAccord]

i forgot the brand my header was too but i got mine from ebay for 100. Still works great after 10k

[90CB7EURO]

i got mine for about 90 just make sure u get better gaskets cuz they suck

[9threeEX]

Got mine from ebay seller "tuningpros" - no complaints with quality of header and downpipe, but the gaskets were junk.

[madwagon]

I've used several. They get the job done. better than stock, but nothing crazy. I don't see the point in jumping up to some JDM zooty manifold. Hundreds of $$ for what... 4 or 5 horse more than what you get from a generic ebay mani?

[deevergote]

The only F22A header worth paying a lot of money for is the Bisimoto header. Otherwise, the cheap junk you find on ebay works fine. Just get new gaskets, because the gaskets that come with those things are crap.

If you need CARB approval, DC Sports is good... but the generics provide almost as much power for a third of the price.

[Jaysson_2012]

If i were to buy a Ebay header, Which gaskets would i buy? And from where are the best ones to buy?

[JBradley500]

look into Copper RTV gasket maker... most racers use it because it doesn't have a tendency to fail like normal header gaskets... also making sure the fasteners are always torqued (and kept torqued) helps a bunch.

[92accord ex]

what gaskets do you guys recommand

[92accord ex]

look into Copper RTV gasket maker... most racers use it because it doesn't have a tendency to fail like normal header gaskets... also making sure the fasteners are always torqued (and kept torqued) helps a bunch.

thanks man

[InOneAccord]

nice recovery of an old post... it could have gone into the graveyard of posts...

[musteredonme]

i bought one for my F22 and gave it to my buddy not to long ago and its still holding up well just make sure the bracket for the back of the block is on other wise you will blow out the gaskets

[deevergote]

nice recovery of an old post... it could have gone into the graveyard of posts...

His question applied, and was a worthwhile question. Your post, however, was completely unnecessary. Let the forum staff do the moderating... you just worry about asking and answering questions. K?