I just swapped to a f22b sohc, and running the ecu for it, i just pulled the codes and i got 41 primary oxygen sensor heater, and 21 vtec spool soleniod valve, i do not have my vtec soleniod plugged in. those were the CEL codes that came up.
for the D4 codes, i have 7 shift solenoid A , and 14 FAS wire PGMF1.
the car idles rough at 800 rpm. and does not smell good
What do I need to do to elliminate these codes for the D4. any help would be appreciated.
for the D4 codes, i have 7 shift solenoid A , and 14 FAS wire PGMF1.
the car idles rough at 800 rpm. and does not smell good

What do I need to do to elliminate these codes for the D4. any help would be appreciated.



Comment