question about turbo

[odibmx1]

my friend just gave me a turbo with a eclipse manifold i would like to know it will work in my cb, i know this is a noob question but ive never delt with turbo's befor.its a garrett MR187909 i think its a TDo4 turbo its an external wastegate and all i have is the manifold and the complete turbo, what elts will i need to be able to run this on my car if i can. thanks guys
other #s on the plate are 466491-3003

[Jccck]

An Eclipse Mani will work on an F22A/H23A yes
What you'll need is prettymuch everything else

[Rusty]

First off I would suggest doing a lot of research. This site is full of all sorts of info on how to Turbo the CB.

Accord R33 wrote up a DIY for the DSM turbo install (It's a little older but the info is good) It also has a parts list i believe

[odibmx1]

allright kool guys so the turbo i have is an eclipse turbo?

[odibmx1]

First off I would suggest doing a lot of research. This site is full of all sorts of info on how to Turbo the CB.

Accord R33 wrote up a DIY for the DSM turbo install (It's a little older but the info is good) It also has a parts list i believe

I cant find the diy anywhere

[odibmx1]

found the diy sorry didnt kno what i was lookin at..duhh.lol one more question can i start off on boost without an intercooler? im going to get one eventually

[Rusty]

allright kool guys so the turbo i have is an eclipse turbo?

You have the eclipse manifold and a Garret Turbo. The Turbo that came stock with the Eclipse was either the 14b or the 16g. i think.

found the diy sorry didnt kno what i was lookin at..duhh.lol one more question can i start off on boost without an intercooler? im going to get one eventually

I wouldn't run it w/o the intercooler. why not just wait until you get everything before you start the install.

[odibmx1]

You have the eclipse manifold and a Garret Turbo. The Turbo that came stock with the Eclipse was either the 14b or the 16g. i think.



I wouldn't run it w/o the intercooler. why not just wait until you get everything before you start the install.

i did some research last nite im pretty sure its a TDo4, it also has water coolant lines how would i tye these into my system?

[odibmx1]

also is there any kit out there that has everything elts i need? i know what i need now just tryin 2 make it easier on my self and not having 2 peace every thing together, thanks soo far guys its been a real big help

[Rusty]

You might be able to get a kit with all of the stuff on like Ebay or something. But you're better off piecing it together b/c it will be a lot cheaper and probably better quality.

Also, I know water coolant lines are a good idea but I don't know much else about them. sorry.


~ Valerie

[Cautrell05]

http://www.cb7tuner.com/vbb/showthread.php?t=17090

Lot of good info in the forced induction section.

Nick

[odibmx1]

i have accords r33's write up printed out. im going to run the water cooling on the turbo im just not sure how to plumb it. Which ecu should i use? it didnt say in the write up

[CB7 Sleeper]

i have accords r33's write up printed out. im going to run the water cooling on the turbo im just not sure how to plumb it. Which ecu should i use? it didnt say in the write up

You will need a chipped P06 ECU and you are also going to have to have it dyno tuned before you try running the engine with your new turbo setup.

You need an intercooler if you are boosting, don't even try to run without one because you'll be detonating like crazy and ruining your engine I'm sure.

It's good that you have the write up and all, but you should still do some research on boosting and learn a few more things to avoid issues later due to lack of knowledge or misinformation.

This isn't something to just jump into, research is key here. If you want a healthy, strong running, powerful, and reliable setup, you need to do things right the first time.

Good luck.

[odibmx1]

You will need a chipped P06 ECU and you are also going to have to have it dyno tuned before you try running the engine with your new turbo setup.

You need an intercooler if you are boosting, don't even try to run without one because you'll be detonating like crazy and ruining your engine I'm sure.

It's good that you have the write up and all, but you should still do some research on boosting and learn a few more things to avoid issues later due to lack of knowledge or misinformation.

This isn't something to just jump into, research is key here. If you want a healthy, strong running, powerful, and reliable setup, you need to do things right the first time.

Good luck.

thanks bro, i researched all last night and im still researching as i type this message. thanks 4 the ecu info. i am a mechanic i work at firestone,, which sucks ass so not 2 brag i know my shit when it comes 2 cars/trucks the only thing ive never been i contact with is turboing a car once again thanks 4 the info, i still need advice about the coolant plumbing. thanks so far guys!! i love this site!!

[odibmx1]

thanks bro, i researched all last night and im still researching as i type this message. thanks 4 the ecu info. i am a mechanic i work at firestone,, which sucks ass so not 2 brag i know my shit when it comes 2 cars/trucks the only thing ive never been i contact with is turboing a car once again thanks 4 the info, i still need advice about the coolant plumbing. thanks so far guys!! i love this site!!

still need help