f22 head

[preludejim]

i broke the timing belt and bent some valves . so my questions is have any of you guys successfully reseated new valves in your head ?,or am i better off just buying a new head?

[CB7/KA8]

I've had it done on my head. You will have to take it to a machine shop though. You might as well get a full valve job. This is also an opportunity for you to do a mild build on the head (cam, valve springs, valve job and maybe a port and polish.)

[XcluziveAZN]

if anything just buy a rebuilt head from ebay. ~$200 and you don't have to ship back core (depend on the seller)

[vh22accord]

Just pull the head and if the valves are not too bent bend them back. I have done this at least a dozen times and have had no trouble out of the engine afterwards.

[preludejim]

the valves are bent i know this for a fact.this is my wife's car she is on my ass to fix it b/c she wants her car back and i just got a new motor in my 3rd gen lude. so driving the makes her want her cb7 back on the road

[CB7Man]

People laugh at me when I replace parts that dont need to be replaced.
Then when their timing belt breaks, I laugh.

Timing belt breakage is no fun mang
Junkyards have heads, I got one for $50 and slapped it on my other car.
Works fine, but if I had to do it again, I would've rebuilt the head.

[dreamshatter]

if anything just buy a rebuilt head from ebay. ~$200 and you don't have to ship back core (depend on the seller)

i ws thinking the same a machine shop is gona charge u atleast 150 then if you pp or angel job its gon cost way more so if your just looking to get your car running again go with the ebay head