To make it true, yes... but when you tell someone to "shave and deck", you're suggesting considerable modification to increase compression... which will also throw their cam timing off.
The head should be milled AS LITTLE AS POSSIBLE. Especially since it will be unsalvageable if too much material is removed.
I respect your experience, but what you've done and what I know to be correct may very well be two very different things. I've been around here a very long time, and I've learned that just because many people have done it, doesn't mean it's the right way to go about it.
The head should be milled AS LITTLE AS POSSIBLE. Especially since it will be unsalvageable if too much material is removed.
I respect your experience, but what you've done and what I know to be correct may very well be two very different things. I've been around here a very long time, and I've learned that just because many people have done it, doesn't mean it's the right way to go about it.
Comment