Im doing my front end link bushing on my 91 accord and cant seem to figure out the energy suspension bushing kit, whats the order it goes in? Another question i was installing the 40/40 proportioning valve and somehow the hardline coming from the right front brakes seems to be way off from the proportioning valve...any advice? thanks guys
-
-
put one retainer and bushing on the bolt
slide it through the sway bar then put on another bushing then retainer
after that you will slide on the little spacer
put another retainer and bushing on and slide it through the control arm
now all thats left is to put on the last bushing and retainer.
And tighten down the bolt and you're done!
Be sure to use PLENTY of lube
and
DO NOT over tighten the bolt. it should be snug then tightened down with maybe 5-6 full turns of the wrench
Comment