My dome light isnt coming on at all, in the middle or on position. I removed it and wired it to a ground and a 12v source to check to see if it works and it does, the bulb lit up in both positions. My dash indicates everytime a door is opened on all four but my door lights do not work either, so im guessing its in my Dome light wiring....so where exactly can i go to check to see if my dome light is grounded or being powered??
-
-
check your fuses?
-
I had the same problem, and it tuned out to be the little slider sensors in the door jamb. The dash would still light when a door was opened, but no lights would come on.
You can take them off and pull them apart to clean the connections. I am assuming you already checked all the grounds?'91 EX 280,000 || '90 LX 330,000
_____(me)__________(wife)___
Comment
-
Each one of the door triggers is a ground. I found this explaining in a little more detail:
http://www.cb7tuner.com/vbb/showthre...e+light+wiring
I would start with a good cleaning of these switches, then move on to bulbs and fuses. If that doesn't work, move on to wiring. GoodLuck
'91 EX 280,000 || '90 LX 330,000
_____(me)__________(wife)___
Comment
-
I had the same exact problem.. I removed the dome and disassembled it, and its not wire inside its just like metal pathways to the switch. I lightly sanded all the connecting areas on the switch plate, and bent the spring on it a little to give it a better more solid connection, plus it makes the switch action firmer. My light works great now. Just use an electrical multi tester to be sure you have power to the dome first. I did this a while back, but if I remember correctly, one of the mounting bolts is the ground... hope that helps.Comment
Comment