cyp sensor code 09

[Jimmy22]

I bought a 92 accord and it turned out to have an intermittent issue. I didn't know about it becuase they smashed the check engine lamp. What it does is, every once in a while when started, will stutter at low rpms, especially from a stop. I finally figured out the check engine lamp was out and figured out I had code 9. I checked the resistance at the ecu and it was within spec and has no shorts, so I replaced the ecu. The previous owner put a new distributor on it and was messing with the cyp wires, which makes me think that is why they replaced the distributor. Is there anything else that could cause these issues and code 9. When I clear the ecu, the check engine comes on immediatelyafter starting the car. It doesn't wait until there is symptoms

[deevergote]

Chances are, the sensor is shot. Replacing the dizzy is your best bet, even if the previous owner already did (many replacements are remanufactured units, and often defective right out of the box... I've had my share of such things!)

[Jimmy22]

Can I replace the sensor, if I could find one? I had it apart today and it looked like it could

[deevergote]

Anything can be replaced, but I believe this is one thing that is beyond the skills of most people. Replacing the entire distributor is how just about everyone fixes the problem, I believe. I don't have any personal experience with it, so I'd wait for someone else to chime in to confirm what I'm saying (or to call me an idiot... it happens...)

[Jimmy22]

It looked like it was just a couple screws holding it in, I couldn't tell though



Is there anything else that could give code 9, besides disty, wiring, and ecu?

[deevergote]

That's really it, as far as I know.

Go to hondaautomotiveparts.com and see if you can order the sensor separately. Very often, you can't buy a replacement part from Honda if it's something that shouldn't be replaced by itself (front upper ball joints are an example of this.)

[Jimmy22]

i figured out, the reason its not sold by itself is because it is built in to the distributor wiring harness. To replace it by itself you must splice wires. Id like to try that, to see if it solves by problem.

Anyone have a busted distributor that they could salvage the sensor for me? Id gladly pay for it

[deevergote]

Have you read the rules of this site?

[Jimmy22]

Have you read the rules of this site?

you must be referring to this:

There is to be no buying, selling, or trading with ANY "Newcomer". Doing so will get all involved parties banned.
If it is brought to the attention that a "Newcomer" is attempting to buy or sell items via PM or Visitor Messages, that member will be banned.
Additionally, offering free parts is also not allowed. I understand that there is no harm in giving something away... but people will inevitably ask for items to be shipped, and then there is money involved. Keep it to the classifieds.

I read that newbies weren't allowed to buy/sell, but i had thought it was to keep spam to a minimum. It wasn't until i reread the rules (as per your instructions) that i realized it was so stringent. My apologies.