I recently purchased a 90 ex sedan and have been slowly getting it back to working order. After lurking for 2 weeks, this will be my first post. I would like to add this to the end of the brake swap discussion but don't have the required privileges. When looking over the data for Legend calipers, I came across a thread about the width of the VTEC rotors to take into consideration.
The gist of the thread is that the legend caliper bracket (28T) is designed for 28 mm width rotors and the 92-96 prelude VTEC rotor is only 23 mm, which can risk damage to the caliper dust boots. There are two alternative Legend caliper brackets, the 25T and the 23T, outlined in the post, so be aware of that when purchasing from the local junkyard.
post here
The gist of the thread is that the legend caliper bracket (28T) is designed for 28 mm width rotors and the 92-96 prelude VTEC rotor is only 23 mm, which can risk damage to the caliper dust boots. There are two alternative Legend caliper brackets, the 25T and the 23T, outlined in the post, so be aware of that when purchasing from the local junkyard.
post here
Comment