f22a1 build and need help

[rsk subzero]

So i m doing my first build and look to make real power out of my f22a1 and i want to touch the 300/400
Money is to be spent and i accept a 4500 build limit so if i could get some help of what to do or buy to reach my goal and were to look
Thnks

[turboAccordHSF]

http://bisimoto.com/store/index.php?...e17baec7eb2a7f

Have fun...

[deevergote]

I hope you're planning on turbo... because that's going to be impossible to do N/A.

Forged internals with stock sleeves could probably hit 300 safely. I wouldn't go over 300 on stock sleeves, though. 400 would be safest with a resleeved block.

My advice is to check out the thread in the forced induction section of this site that shows the most powerful turbo setups on this site. Look at their setups and use them as a basis for your own build.

[rsk subzero]

Thanks but what about head wrk and what about my stock tranny will it handel it or will i need to swap it as well and i shall have fun wid this one

[deevergote]

I don't understand those words.

[rsk subzero]

I was asking what i should do to the head i want to go bigger valves and cam with the pro springs and retainers and for the tranny will my stock 5 speed hold up or will it be too much power for it and what intake manifold should i use and i thank for ur help

[Jarrett]

No one on here wants to hand you a modification list and tell you to go satisfy that list to meet xxx whp goal. You're going to have to do your own research and then come back with more specific questions that you're still left with. Everyone's a beginner at somepoint, but that doesn't mean that your hand is held through everything.

Do your share of information gathering for yourself and you'll find this site to be awesome and loaded with information. Ask lots of lazy questions and you won't enjoy your time here so much.