What ref for Energy Suspension for 4ws ?

[KLIOBZH]

Hello I need you for take the good ref for Energy Suspension polyurethane and not take duplicate.
It's for 4ws car.

16.18108G Master Set for Accord :
Front control arm bushings, front strut rod bushings, front shock bushings, front coil spring isolators, front end links, ball joint and tie rod end boots
http://www.amazon.com/Energy-Suspens...productDetails

Energy Suspension 9.13103G O.E.M. Style Tie Rod End Boot - Pack of 2 :
rear Ball Joint Boot Set
http://www.amazon.com/Energy-Suspens.../dp/B000CN5ERY

Energy Suspension 16.6101G Front Spring Isolator Set for Honda :
Front coil Spring isolator
http://www.amazon.com/Energy-Suspens.../dp/B001662WPS

Energy Suspension 16.8106G Front Shock Bushing :
Front Shock upper & lower Bushing Set
http://www.amazon.com/Energy-Suspens...ywords=16.8106



Documentation : (P22 and 44)
http://energysuspension.com/assets/f...on-catalog.pdf

Thanks !

[KLIOBZH]

An other question,
For the coilover F&F type 2, it's compatible with 4ws ?

Thanks
Guillaume

[H311RA151N]

I am not at all familiar with 4WS as I have only seen pictures of the 4WS system.

I do not believe there are rear aftermarket bushings such as Energy Suspension or Prothane for the 4WS CB7. 4WS is very rare even in Europe and Asia. And Energy Suspension and Prothane primarily sell to the American market.

The front end bushings that you posted I'm fairly certain will work though. Again, I am not positive but knowing Honda the front end bushings are the same on 4WS and models that do not have 4WS.

If there is another CB7 you could look at that does not have 4WS that would be best as you could compare yours which has 4WS with the one that does not.

If you were able to do this, which I recommend, a set of calipers will help you take measurements.

Like these. http://www.google.com/imgres?imgurl=...ed=0CAUQsCUoAQ

[KLIOBZH]

This parts is not for rear 4ws system ?

Energy Suspension 9.13103G O.E.M. Style Tie Rod End Boot - Pack of 2 :
rear Ball Joint Boot Set
http://www.amazon.com/Energy-Suspens.../dp/B000CN5ERY

[KLIOBZH]

Rear suspension :

[H311RA151N]

You have a rear control arm unlike the non-4WS steering models. Unfortunately I know nothing about 4WS.

The only thing I can tell you do do on the rear is measure and compare the parts with a non-4WS steering model to see what bushings will interchange.

On the front, the tie rod boots that you asked me about I would imagine they will fit on the front. The ones I'm referring to are below.

These should fit the front tie rod ends as that is what they are for. http://www.amazon.com/Energy-Suspens.../dp/B000CN5ERY

[KLIOBZH]

Thank you for your answer H311 !

The bottom point fixation it's same than 2ws, no ?

[KLIOBZH]

Another pics :

[sonikaccord]

No, the 2ws shock body attaches directly to the rear spindle. The 4ws looks like it also has a lower control arm. Maybe the bushings from the front control arms fit the rear? Maybe some people on the prelude forums would know as some came with 4ws here in the states.

[KLIOBZH]

OK, thank you Sonik.
I look the rear suspensions reference of prelude 3g.

And for Energy Suspension you know what reference I need ?

[KLIOBZH]

This car it's 4ws and really low :
Modified Honda Accord 2.2i SE 4WS 1992



What's type of rear and front suspensions on cb7 ?

[H311RA151N]

I think maybe the springs are the same for 4ws and non-4ws...

http://www.dcperformance.co.uk/cheap...av-120200.html

According to that. ^^^

[KLIOBZH]

OK, H311 and you have a start of answer for coilovers ?^^
I think it's OK between 2ws and 4ws... :Confus:

http://www.cb7tuner.com/vbb/showthread.php?t=195024

[H311RA151N]

I do not unfortunately.

I have tried searching everywhere and I cannot come up with any coilovers, just springs.

[KLIOBZH]

Yes, me too !
I think the coilover for CB7 it's OK for all, 2ws and 4ws.

And for rubbers remplacement Energy Suspension, I need what reference(s) ?
the first link it's sure.
But 3 others links are duplicate or not ?