Im wondering if pistons from an frm sleeved motor can be used in an iron sleeved f22a. I realize they are 87mm bore as compared to my 85mm but if strength is going to be a problem i can correct that, I dont belive 2mm is going to be a major strenght issue.
Im not to familiar with the frm h22's but i know they take special pistons or they need to be sleeved but i need to know if those pistons can be used in a non frm sleeve.
Thanks
Im not to familiar with the frm h22's but i know they take special pistons or they need to be sleeved but i need to know if those pistons can be used in a non frm sleeve.
Thanks
Comment