Problem With Front Door Seals

[ilovemycb7]

Does anyone else have the front door seals ripping off on the top. I don't know how to explain it but it's the very top part that doesn't appear to do much actual sealing but it's ripping off. I tried gluing it down with crazy glue, but ineffective. What could I try?

[spaztastic]

Mine do the same thing, I think replacing them is probably the best thing to do.

[NAiL05]

Epoxy works wonders or silicone. Im guessing your talking about that lil rubber deal at the tip of the door that runs along topside of the window.

[hata_61]

or you can try weatherstrip glue. i belive permatex makes it and the color of the glue is yellow. it comes in a red tube.

[ilovemycb7]

Thanks, I'll try looking for some better glue than crazy grue. hah. Those things are so annoying though...

[oranger]

Mine do the same thing, I think replacing them is probably the best thing to do.

Take another look, replacing those things looks almost impossible. Gluing is a good idea, as long as your not getting water inside, it should be a functional problem, just an nusance.

[ksucd5]

I had the dealership do them on my cd5 for $600 for all the seals on two doors!!!! Sounds like alot, but there is no more wind noise, and the windows dont fog up from air leaking in on cold days.

[ilovemycb7]

So that's 300 bucks a door, that sounds like a lot to me, since the wind noise doesn't bother me that much as I'm not going over 60 often (don't driveon freeway much) and I just always leave my fan on. But that's good to know. You know the cost of getting teh seals and doing it yourself?