throttle body

[Dans92cb7]

i have a a6 throttle body on my a6 motor can i bore it out my self or send it to a machine shop or is there another throttle body that well bolt up?that is bigger and better for more power

[slammed4thgen]

its not going to give you enough power to feel maybe 2-3 whp and just look for one in classifieds like i did 66mm for my h

[Cb7GHOST]

do an H plenum swap. its easy and worthwhile.

[Dans92cb7]

do an H plenum swap. its easy and worthwhile.

whats that just the throttle body?or manafoild and throttle body?

[Dans92cb7]

and what h-seriers

[owequitit]

It is already covered in the DIY section. There is a whole write up in there.

[ExCoupe92]

whats that just the throttle body?or manafoild and throttle body?

well it depends how in depth you'd like to go. Most commonly people just swap the plenum and throttle body, but at the same time, I believe the h23 headers bolt right up to your a6 head as well. I personally bought the h23 plenum and am currently waiting for my throttle body where I will send both into maxbore to have him match bore the two of them out.

[Dans92cb7]

i have dc headers thats better then the h23 headers right..?and the boring is that for aftermarket use or is it recomded...?

[Cb7GHOST]

i have dc headers thats better then the h23 headers right..?and the boring is that for aftermarket use or is it recomded...?

yes your DC header is good/better than stock A6.
boring just lets more air in on stock parts for a little bump in power. aftermarket parts like throttle bodies are usually already enlarged.

[Dans92cb7]

yes your DC header is good/better than stock A6.
boring just lets more air in on stock parts for a little bump in power. aftermarket parts like throttle bodies are usually already enlarged.

ok so i dont have to have it bored...and did u have a place do it or u do it your self and what h-series plenum u go with h22/h23....and is one better then the other and what kinda power am i looking at i have the stock a6 mani and can i get the 70mm thorttle body i found some on e-bay...for the h-series

[Cb7GHOST]

http://cb7tuner.com/vbb/showthread.p...5&page=1&pp=20

[Dans92cb7]

yea i checked that out yesterday i think he went with the h22 but it seems lkike most are going with h23...?

[Cb7GHOST]

H22 plenum and H23 plenums are the SAME
Throttle bodies are pretty much the same too, other than the map sensor.

[Dans92cb7]

H22 plenum and H23 plenums are the SAME
Throttle bodies are pretty much the same too, other than the map sensor.

so it really dont matter what one i go with then...?

[d112crzy]

nope.