Trailing arm for 92 LX

[peejayreyes]

want to ask if it's possible to replace just the bushing of the trailing arms or do i need to replace the whole assy?

thanks

[customchord]

Yes you can you gotta cut the old bushing out. Energy Suspension makes a couple sets for our cars check them out.
http://www.energysuspensionparts.com...s.asp?cat=1007

[HondaFan81]

Seems like they don't sell just that bushing in itself. I know some have filled this bushing with a polyurethane filler, I do not know how long that lasts or how well it works. I would probably transfer another better bushing condition used trailing arm from the same rear brake setup (drum or disc 90-93 Accord) since you'll have to remove it for either fix anyhow.

http://www.hondaautomotiveparts.com/...REAR+LOWER+ARM

[djphonics]

It's weird that Honda does stuff like this. On the CRX, they don't list the rear trailing arm bushing as a part. Gotta buy the whole arm (rediculous!). However, it turned out that these parts do exsist, and I was able to buy them from magauto.com. It's possible they could do the same for the accord.

[peejayreyes]

customchord, hondafan81, djphonics;

thanks for the info. now if only i could find a supplier here in the philippines.

[casterX]

if you can find the right size replacement bushing(ask around the local auto parts shops). you can DIY
http://www.cb7tuner.com/vbb/showthread.php?t=8980

[djphonics]

customchord, hondafan81, djphonics;

thanks for the info. now if only i could find a supplier here in the philippines.

Well, you might be able to order from www.hondaautomotiveparts.com (the whole arm with new bushing is $100) and have it shipped to you, but I'm guessing that wouldn't be very cost effective.

[peejayreyes]

thanks for the link to the DIY thread of cp_mike.

yup, i'll have to leave the car in the shop so they could take it down and get the bushing and look for a compatible bushing and compare it.

same thing when i replaced the bushing of the front shocks and front lower arm.

i'll ask my cousin if he could find me bushings in calif and send them here.

if you can find the right size replacement bushing(ask around the local auto parts shops). you can DIY
http://www.cb7tuner.com/vbb/showthread.php?t=8980

[peejayreyes]

how come i couldn't open or download the website. i used to be able to open and browse the site for parts. even if i use another browser or computer.

Well, you might be able to order from www.hondaautomotiveparts.com (the whole arm with new bushing is $100) and have it shipped to you, but I'm guessing that wouldn't be very cost effective.

[djphonics]

Hmmm that is odd. I just tried it right now and it worked. Maybe they have something turned on to where you cannot access it from non-US servers?? Or maybe it is a problem with your connection?

[peejayreyes]

yup, was thinking that myself. they may have blocked the access from the philippines to the site.

here's a screenshot attached.

Hmmm that is odd. I just tried it right now and it worked. Maybe they have something turned on to where you cannot access it from non-US servers?? Or maybe it is a problem with your connection?