So I just got new depo headlights / corner lights, and bumper lights. My original corner lights have two bulbs each. One is always on, the other is on with the headlights, and flashes with the signals.
The new depo corners only hold one bulb, so I will use the one that flashes.
My current bumper lights are a miss matched pair. One has a push in style bulb, the other has a 1/4 turn 1156 style bulb. The new bumper lights come with 1156 style bulbs, but no sockets.
I would like to swap over to 1157 style bulbs. I could power the low filament with the unused line from the corner lights, then power the high filament with the existing bumper light circuit. Does anyone know what part number I should be looking for as far as the proper socket for the 1157 bulbs, and the necessary wiring plug to connect to it?
The new depo corners only hold one bulb, so I will use the one that flashes.
My current bumper lights are a miss matched pair. One has a push in style bulb, the other has a 1/4 turn 1156 style bulb. The new bumper lights come with 1156 style bulbs, but no sockets.
I would like to swap over to 1157 style bulbs. I could power the low filament with the unused line from the corner lights, then power the high filament with the existing bumper light circuit. Does anyone know what part number I should be looking for as far as the proper socket for the 1157 bulbs, and the necessary wiring plug to connect to it?