If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Have a auto body shop cut it out for you, or cut yours up...
Just start the hole small, and work your way bigger.
It sounds intimidating, if i could do it with a cheap hacksaw that was 1.00 i'm sure you can do it, good luck with whatever you pick.
To find one is rare and pricey, if someone has fogs they wanna keep them.
Meh, not feeling the honda game anymore.
MY CAR IS SOLD!!!
Just cut them out of yours. Pull the bumper off and clean the backside REALLY good. There should be a faint outline of the hole(s) to cut. If you have a bumper that doesnt have the outline(s)....then....i dunno what to tell ya.
Ebay is usually a good place to start. That or Majestic...
I'm sure through the dealer you could order one w/ the cutouts, but if you are willing to do all the rest of work yourself, then you'd be skilled enough to do the cutouts on your bumper, go for it, take several hours to do it I'd suggest doing it all by hand (for final finish sanding/beveling, you could dremel it) but use a small stiff keyhole saw. Then finish it off w/ door edge moulding.
yeah, ive checked majestic and it's not worth it.
and to do it myself...i dont want to ruin it. But i think i may have no choice.
im gonna go check the junkyard in a few days and see if i can find one
actually im not sure if they all have this but on my buddies 93 when we took his bumper off it has dotted lines for where the foglight is suppoesed to go kinda like a cutout thing..
Comment