Having trouble removing my front bumper help!!!

[honda_mike]

As I type this right now, im trying to get the front bumper off to do black housed headlights. I'm stumped on getting the bumper off, it seems to be struggling up top not wanting to come off. The side signals lights are still intact, took the bolts and screws off and nothing they want even come out. Dont know if im missing anything, but and helpful adivce would be great to get the bumper off.

I will post pics up once my laptop decides to run faster lol

[90ACCORDLXGUY]

There are two 12 or 14mm bolts on each side behind the turn signals in the
bumper and then a 14mm nut inside the engine bay, one by the battery and
one by the cruise control. After that it should slide off.

Also if it is the first time taking it off normally there are plastic screws underneath
holding the bumper on too. I just cut mine out cause it was hard for mine to come
out. Good luck, if you need more help I will gladly take pictures for you.

[honda_mike]

There are two 12 or 14mm bolts on each side behind the turn signals in the
bumper and then a 14mm nut inside the engine bay, one by the battery and
one by the cruise control. After that it should slide off.

Also if it is the first time taking it off normally there are plastic screws underneath
holding the bumper on too. I just cut mine out cause it was hard for mine to come
out. Good luck, if you need more help I will gladly take pictures for you.

thanks for the tip, i figured it out after I posted this, it was the two nuts inside the engine bay the one beside the battery and the cruise control. Those were the two holding it back