OK heres the skinny, I bought a Vigor Flushmount spoiler, I sanded it down, I used a sandable Primer, I painted it with 3 light coats and the paint just doesn't seem to stay in the areas shown in the picture...what did I do wrong?
not enough primer? only used 1 coat
not enough sanding? sanded for a few hours with a palm sander/hand sanding using 400 grit(read somewhere on here that you shouldnt go below 320 but I couldn't find 320)
any help is greatly appreciated!
not enough primer? only used 1 coat
not enough sanding? sanded for a few hours with a palm sander/hand sanding using 400 grit(read somewhere on here that you shouldnt go below 320 but I couldn't find 320)
any help is greatly appreciated!
Comment