steering wheels and hubs

[accord4thgen]

I have a 90 Accord Ex without the airbags. I want to get an aftermarket wheel and removable hub setup. What are my options?

Any way to mount an s2000, EP3 SI or CTR/ITR JDM wheel with the removable hub setup in the 4thgen?

How hard is/could be this swap and what is a good brand for a removable hub assembly?

Thanks
________
Virago 750

[uncle_el]

options:
keep what you have
momo hub, momo steering wheel
momo hub, sparco steering wheel (not sure off the top of my head if sparco makes hubs)

ctr/itr: http://www.cb7tuner.com/vbb/showthre...light=steering

[4drcord]

s2000 fits on 96-97 accords. i dont know about ours. my friend has one i should put it on mine.

[arrozburner]

http://www.cb7tuner.com/vbb/showthre...+wheel+install

momo steering wheel with momo hub...im going to get a quick release hub soon, i'll let you know what i get

[JDM4DOORLX]

Don't mean to jack the thread, sorry, but can you get a steering wheel with the buttons or toggles on it so you can still use you cruise control? Or else I would dash mount it.

[arrozburner]

alot of the connections for cc are together with the srs...so since you have to disconnect the srs you will lose cc...but im sure it can be done

[4drcord]

http://www.cb7tuner.com/vbb/showthre...+wheel+install

momo steering wheel with momo hub...im going to get a quick release hub soon, i'll let you know what i get

look at the narspecs! they are race tested and they are supose to be the stongest. I think the site is www.nar-spec.com

[arrozburner]

look at the narspecs! they are race tested and they are supose to be the stongest. I think the site is www.nar-spec.com

good looking out...not too expensive either