steering wheel problem

[arrozburner]

ok, i installed the steering wheel and might i say, it looks very nice. currently, im trying to write up a DIY but i have a couple of small problems to try to fix to make it as complete as posible.

1. how do i turn off the SRS light? since i have no airbag, the light stays on.

2. does anyone know how to connect the horn button?

well, thats it. once i get some answers i'll finish up the DIY and post it up. thanks

[Jarrett]

10 minutes? Dang, I did it at 45 mph in between 3 traffic lights. But that was just t say that I did. As far as removing connectors goes, you're pretty much out of luck. Unless you want to cut off the tape on the wiring harness behind the dash, cut off the cruise wires, resolder other wires back together, then retape the harness. Other then that, I'd just say cut it in the interest of time.

[arrozburner]

btw, i didnt have to cut the cables...i found out how to remove them and theyre still intact. just had to look around and remove 3 hidden screws, but its done and t looks nice

[arrozburner]

BUMP! i really want to connect my horn so that it works! too many crazy drivers around here that need to be honked at the fuse is a lil annoying too...the only other thing im thinking of doing is taking the cluster out and removing the bulb but im hoping theres anothey way

[akkordlayinkit]

It shouldnt be that hard to find the right wire to the horn, then if nesessary hook up another switch and mount it somewhere... on the SRS light, do what I did, remove the cluster then pull that buld out, because theres too many srs wires too go looking thru them to find the right wires to disconnect, but if you find another way please share.
Also get those pics up soon.

Jay

[arrozburner]

well for now, here is the steering whell installed...i like it

[akkordlayinkit]

Looks good, how much$$ was the wheel and adapter?

[arrozburner]

i dont remember well but i think it was $240 for both. do you have a aftermarket steering wheel as well?

[accordzoom]

fighter right?

[arrozburner]

yup, 350 mm fighter in brushed aluminum...i alslo like hoe the race one looks but decided on this one instead. btw, does anyone know how to hook up the horn...help me out guys! i checked the haynes and it said it was a blue and red wire and i found the wires connected to the turn signal/headlight switch so i tried to connect the horn button there and nothing...is this the right wire?

[TcH2]

i read in some magazine that u had to phone some place in order to remove ur airbag.

[arrozburner]

Originally posted by TcH2
i read in some magazine that u had to phone some place in order to remove ur airbag.

what do you mean??? to get permission or to have them remove it? i took it off myself and didnt call anyone...maybe thats why my horn doesnt work??? btw, i still need some horn help guys

[arrozburner]

BUMP

[Jarrett]

Go to Wal-Mart and get a couple airhorns. If they're those people that REALLY need to be honked at, just get a paintball gun. Forget camera mounts, someone needs to do a DIY on a paintball gun mount. Some drivers just need to be taken care of.

[rebels]

My "BRAKE" and "SRS" light are always stuck on. I don't know why but I am getting sick of it and I am about to pull the bulb out of the brake one and put the vtec thing in the SRS one. I don't think anything is wrong with it, but I am sick of seeing the light!