the leathers!

[4bangin']

ok, so i need absolute conformation on this! i know that everyone says that accord seats up to 99 will fit into our cars but i want to make 100% sure because $400 cnd is a lot to spend on seats that don't fit. there are some really nice black leathers at the junkyard here from a 95 will they fit? i am not so worried abiout the fronts because i can get bracket fabricated... just the back...

[PRIMOCB7]

a friend of mine has a 92 accord w/ tan leather interior from a 2000 accord coupe. i believe, you'll need longer bolts on the rear brackets of the front seats, and the rear fits almost perfectly.

[4bangin']

sweet thanks next on the list is some Legend JDM Headlights

[4bangin']

how hard is it to hoow up the 8 way adjustable power?

[aero]

90-97 seats bolt in all teh same.. no customizing needed. Anywhere out of that range will most likely need some fabrication.

As far as the power seats, depending on your car, there may be wiring already for it. I couldnt find any in my car, so I just got power from the kickpanel fusebox(so it only works when the key is on) then did a fuse, and wired them up. There will be 4 wires off of the seats, two will be grounds, 2 will be power. I would suggest getting some type of connector so you can connect the seat to it, and then the wires so when you take out the seats, you can just unclip the connector instead of redoing the wiring. But the fuse that you should use for the power seats should be 20 amp.