JDM Intersection lights w/relay

[accord4thgen]

Okay I searched but had no luck

What is the proper way to hook up the intersection lights with the relay....I haven't really looked it over or studied it but does anyone have a diagram or pictures to what and where things should be connected using the oem relay and harness....thanks
________
Brunette spanish

[ProJect]

pretty much you have green/yellow, blue/white, blue/red, red/black, black, green/blue, and white, the blue/white goes into the intersection light, and so does the blue/red, you will have these colors on each side left and right, the green/yellow taps into the bumper turn signal, and so does the green/blue, so what this means is that green/yellow,green/blue are your inputs to the relay and blue/red, blue/white are your ouputs meaning one to each intersection light, and on the intersection lights you ground the black wires, and on the relay black is ground also, then u have red/black which has to be tapped into the parking light wire which is the same color, that way your intersection lights only light up when your parking lights on, then u have white which is constant, hope this helps

[accord4thgen]

Wow i'm seeing colors hahaha.....I'll have to take a better look at the harness and wires....but i think I get the idea.....THANKS
________
Vaporizer Volcano

[seigneur_rayden]

where did U get the relay and harness? I am looking for that too.

[accord4thgen]

wierd. I just hooked mine up to my corner light. While the parking lights are on the sidemarkers are. and when i use my turn signals they blink. It's pretty sweet.

Umm...we're talking about intersection lights on the bumper....not sidemarkers on the fenders...but thanks for the effort
________
PORNSTARS