Aiming my Headlight Lower

[Maple50175]

Okay I got my Blinkers to work! i used another relay since some wire was messed up anyways it works.. all my lights work and blinkers so right im im really happy... Now since i mickey Moused the headlight...(just kinda jammed it int here because i didnt remove the bumper.. and i cut all the bottem peices off like the little balll thing etc. in order for me to get the light it..


I did this because the bumper reinforcment is no good and i wasnt going through the hassle of that so i just got it in there.... Anyways its in there and its aimed high in the air... it's like aimed right at the drivers rearveiw mirror... Now I need to make it lower down by the ground... ive tryed but no luck..... But i havnt screwed in the aiming screw... but still any other way i can aim it? Like moving the bulb or make something work? there has to be Now if i can figure this out My cb7 will be running... I just need 2 tires and pay for my insurence and stuff! so like April it will be on the road!

[Accord R33]

I know moving the bulb wont work because its still gonna reflect off the reflectors in what ever direction they are facing. You will probably have to adjust the screw or take the lights out and put them in again....

[Maple50175]

hmm ill figure somethingout i hope.... or ill just blind people and be a little bitch

[xplode]

install the aiming screw fruit

[fr0zen]

But i havnt screwed in the aiming screw... but still any other way i can aim it?

put in your aiming screw, dude. thats why its called an "aiming" screw.

are the headlights still solid in place by just using the bolts on top to hold it in place? seems like they would kind of shake now when youre driving. anyway, good luck man, you seem to be tearing through the rebuild quick. i dunno about cutting up your headlights though.

[Maple50175]

whoops I didnt mean that i have the aiming screw in i dont have the screws on the bottom in... I had to cut it all to get the headlight in there i guess this is a pointless thread Maybe ill just delete it.

[xplode]

let me know and il delete it
.

[fr0zen]

if your bumper reinforcement is shot you should probably be replacing that as well in this process. taking shortcuts is not always the best way to go.