tapping into door lights... ?

[eriemoto.]

ok this might seem a little confusing/dumb/you name it... but

if i wanted to wire a new bulb to be on along with each door light, would it be alright to tap directly to the connectors of the door bulb? or will that cause too much of a draw from the one connection?

sorry, im not that great at electrical shizz

[ProJect]

were do u want to put the other bulb on, next to the 1 that's on there now or some were else on the door?

[eriemoto.]

were do u want to put the other bulb on, next to the 1 that's on there now or some were else on the door?

somewhere on the door, wiring through the back of the panel if i find a way

[Spartan1987]

should be ok. I don't know what your planning on doing though.
what are you doing?

[maroonaccord2.2]

somewhere on the door, wiring through the back of the panel if i find a way

I'd use LED's, almost zero current draw.....they are small enough to mount anywhere!

[timmy0tool]

i'm curious as to what you're placing. if you put LEDs then it should be ok since they draw very little current. if you are putting foglights then there's a problem (exaggerated of course). it really depends on what you are tapping it for.