Push start button!!!!

[H22A91CB7]

ok i got this damn push start button and i kno dat i suppose to wire it in where i get in the car and insert my key to the acc position and then push the button but i want my shit like the 08 accords..lol..like i wanna get in the car and flip a switch to turn on the acc then press the button do anyone kno how to install a push button?...like which ignition wire go to it and then i need info how to make a switch that turns on the acc so i wont have to use my key....thanks

[slammed4thgen]

for pics visit

http://www.crxmpg.com/diy-push-button-start/


Purpose: There’s the bling factor of having a push button start (especially if you use the s2000 “engine start” button, the anti-theft factor if you wish to hide the button, and the convenience factor of having the button near the shifter if you are using it during engine off coasting.

Time: 1 hour

Tools:
- Soldering Iron
- Wire Stripper/Crimper
- Screw Driver

Supplies:
- 1 SPDT (Single Pole Double Throw) Relay - 3.99 at my parts store
- Some female quick connect ends - 2.99 at the parts store
- Wire
- Solder
- The button!

Check out this schematic and look at your SPDT relay, pretty simple. Figure out which wires are which and wire the stuff up. I labeled this with the colors that are actually used in my CRX. This write up is applicable to almost any car, but you’ll need to figure out which wires are which if you want to do this to another car. Pretty simple. Most people use the S2000 start button, but you can use any button that is normally open and only connects when pressed.



And here’s a picture of the S2000 button, just for reference:



Wire the stuff in there not too prettily just to make sure it works. Here’s mine half done:

Another shot with indications and all that on it.

Get your button and figure out how to mount it. I am going the way of small button skirted by washer and then mounted in my cigarette lighter hole. Here’s the washer pre mounting and painting. I hot glued and burnt myself quite a bit, be careful.

I put this little cone over the button to paint the washer.

Painted shots, looks decent to me:


Wrap your crippled, burning hand in wet stuff:

Mount up the button itself into the center console part.

Finished the install with the new button, check it out:


Here’s a final shot having actually put the interior back in my car:

I’m very happy with it, piece of cake, as well.

[F20A CB7]

U da man Slammed, I luv cb7tuner.com

[CB7lx91]

me2 suckas

I'll take a second look at this someother day and maybe do it.

[slammed4thgen]

U da man Slammed, I luv cb7tuner.com

yeah im pretty good at copy and paste

[mj213]

haha! Dangly parts!


Yeah. Cool idea in theory. But that washer looks so ghetto. Would have been better off with one of those "easy" buttons mounted on the dashboard. I know the point was to be discreet, but... what's discreet about something replacing the cigarette lighter?

[Mayhem Tripp Robinson]

i got one

[slammed4thgen]

yeah do it the right way by using s2000 button

[ChIoVnIdCa]

like this

View My Video

[timmy0tool]

like this

View My Video

awsome man! just awsome! no key at all though?

[Chicano2005]

man its amazing!!!!! shit i waish i had the brains to do it like all of you. lucky bastards

[C91BLX7]

awsome man! just awsome! no key at all though?

Lets steal it.

[ChIoVnIdCa]

Lets steal it.

Keys offer the least security. IMO its useless. I have much better layers. If someone where to steal my car w/o at tow truck they would be a true professional. I am not worried about the average thief with a screwdriver.