So, I installed LED's in every bulb slot possible.. Looks great, but after 2 days of having my LED's and resistors installed, the turn signal marker lights in the front corners of my headlights do not turn off, even with the keys removed from the vehicle and the light switch turned to the off position.
Installed a new multiplexer unit due to having burnt internal components and the problem went away...
but guess what!?!? two days later the same problem persisted.. The corner lights do not turn off!! And dealing with a fully discharged battery to boot..
I don't want to burn through multiplex units every two days, so I am seriously contemplating not using resistors, saying FTW and just running a hyper blinking turn signal setup with all LED's still connected...
other info... I used Morimoto resistors, paired with XB Led's from the retrofit source in the front and rear for all the signal lights
Installed a new multiplexer unit due to having burnt internal components and the problem went away...
but guess what!?!? two days later the same problem persisted.. The corner lights do not turn off!! And dealing with a fully discharged battery to boot..
I don't want to burn through multiplex units every two days, so I am seriously contemplating not using resistors, saying FTW and just running a hyper blinking turn signal setup with all LED's still connected...
other info... I used Morimoto resistors, paired with XB Led's from the retrofit source in the front and rear for all the signal lights
Comment