Announcement

Collapse

Please DO NOT Post In The General Section

From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.


The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.


For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.


Everyone will get a couple of warnings from here on out, after that I just start deleting threads.

Again if you have any questions, PM me or one of the other mods.
See more
See less

What injectors ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What injectors ?

    I have a 91 Accord LX 4dr I have a stock f22a1 with 2.50 pipe from cat to the back with a reactive 3''muffler today me and my dad put new head gasket on it and we ported the Exhaust holes bigger we left the intake becasue they already big but i was wondering can i put bigger injectors on it and which ones.
    H23ludeMan

    #2
    unfortunatly, you can't upgrade injectors that I know of, without getting something like an safc. Also, you don't need to upgrade the injectors, unless the i/h/e has been installed. I see you have the catback system, but, do you have a free-er flowing exhaust header? How about a short ram or cold air intake? even with those mods, just chippin the computer can yield more fuel to the motor. Unless you get like a turbo, giving the car more fuel is gonna do you no good. There are other ways to make the car faster. upgrade the ignition with the msd sci system, install a turbo, motor swap, higher octane fuel, underdrive pulleys, vtec head swap, etc etc..If you want a dc sports stainless steel 4-2-1 header, I will be selling mine ,as soon as I get my turbo installed. lemme know. Other then that, the fuel upgraded injectors will do you no good, ESPECIALLY if yo uhave no source of fuel managment system..

    -A. Swift
    CB7 member number 137
    Black Doubt Crew member #2
    Ebay Whore Club member #5


    -I was at the dentist, breathin' in some nitrous oxide (laughing gas) and all of a sudden..I ran faster!!!



    AIM: boostinswifty38

    alipne 7995 deck, pioneer 400w 4 ch amp, and all the wires for sale..500 obo!

    R/C cars and a heli for sale..2 airbrushes, paints, bodies galore..etc etc..tc3 and xxx buggy for sale..400 for it all! hit me up for details n pics

    Comment


      #3
      You don't need larger injectors for what you've done. You need more air flow into your cylinders before doing this. Anyhow, there are fuel injectors or larger size offered for our Accords.

      First, look into more mods on your intake system. Also, add a header to ur setup.
      HondaFan81 For Sale Parts (LOW PRICES ON EVERYTHING)

      Comment


        #4
        but even with the basic mods, i/h/e, cam etc.. Can the stock fuel injectors can handle the increased air supply?? Or are they under powered.. Also, in my questions there are no power adders.. This is for a n/a setup..



        My Ride

        Comment


          #5
          for just those mods, ur injectors will be just fine. if you want, get an safc, and you can put a little more gas into the mix, but without that, u still should be fine..

          -A. Swift
          CB7 member number 137
          Black Doubt Crew member #2
          Ebay Whore Club member #5


          -I was at the dentist, breathin' in some nitrous oxide (laughing gas) and all of a sudden..I ran faster!!!



          AIM: boostinswifty38

          alipne 7995 deck, pioneer 400w 4 ch amp, and all the wires for sale..500 obo!

          R/C cars and a heli for sale..2 airbrushes, paints, bodies galore..etc etc..tc3 and xxx buggy for sale..400 for it all! hit me up for details n pics

          Comment

          Working...
          X