can i get an msd 2 step for my car

[charlie0882004]

ok i want to do an h22 swap. ima leave my car as an automatic. my question is can i put an msd 2 step on my car? because a friend of mine said tha it might not be good for the distuter and it will make holes in my exhaust etc... then another person tell me that i can do it. anybody have any info. the h22 is going to be stock. i want the 2 step because i like to her the revs bounce. will i be replace parts because of this thing?

[N9netwoAccord]

do you even know what a 2 step is or does?

[charlie0882004]

kinda it sets 2 revs and its use for launching etc.. but i mainly want it for the sound help me bro

[turbo90accord]

i wouldnt suggest it with an automatic. and because you want to hear the revs bounce is a very bad reason to buy a 2step. your not going to be able to use it efficiently with an automatic either.
Also its not a good idea on any motor to run a 2step or any other launch control devices without propper valve springs. the chances of holding a valve open due the irratic holding of rpms via cutting ignition is a bad idea.

[charlie0882004]

i wouldnt suggest it with an automatic. and because you want to hear the revs bounce is a very bad reason to buy a 2step. your not going to be able to use it efficiently with an automatic either.
Also its not a good idea on any motor to run a 2step or any other launch control devices without propper valve springs. the chances of holding a valve open due the irratic holding of rpms via cutting ignition is a bad idea.

he was saying something like i need to hook it up to a swith and that i can only use it in N. so f i just get some good valve springs will i be good? because i see people n youtube and honda tech with it and it sounds pretty cool

[turbo90accord]

The majority of the people in the videos you see are using hondata and using the launch control not using a msd 2step. and getting valve springs is alot of time work and money just so you can make your car "two step"

[charlie0882004]

ok so what can i do inorder to make my car sound like this

http://honda-tech.com/showthread.php?t=2375397&page=2


thanks for all ya help by the way

[slick]

that sounds like ass imo

[charlie0882004]

different ppl like different things

[jhoff]

waste of money to hear the revs bounce...
if want to hear the revs bounce take it it top rpm in 1st gear and let it sit there...
some of the stupid shit i hear on this forum

[charlie0882004]

waste of money to hear the revs bounce...
if want to hear the revs bounce take it it top rpm in 1st gear and let it sit there...
some of the stupid shit i hear on this forum

no the 2 step sounds diffrent imo way better

[jhoff]

i was telling you to blow up your motor dumbass
god, you have an automatic and you want to sound like an idiot
no wonder hondas get bad names, people like you

my cuz had it on a built ls/vtec and it would launch perfect everytime

[turbo90accord]

you need about 1500 dollars worth of aftermarket stuff to be able to do this without causing damage to your engine.

[GenDBlade]

my friend has one on his b18b1.

1) it screwed up a perfect condition b18 because he didnt replace the springs.

2)get a msd rotor and replace the stock one.

3)get a manual b4 you do this.

4)after u get a manual, get a lightweight flywheel instead of wasting money on a 2step.

[charlie0882004]

http://www.youtube.com/watch?v=vBjvq...eature=related

thats the sound that i want

so should i get a p72 ecu and a hondata kit and tune it