New Cam offer.. (read inside, no worry no hassle)

[kteller8]

Hey guys, well myself and Rocket Motorsports got a Vtec Cam done.

some of you guys might have seen the H22 cams we did together, now i got a f22 cam done.

If someone out has the motor and dyno access. Id like to sell it to you on an exchange program.

Youll pay for the cam, get it dyno'd and done. If your happy with the results. Send in your cam as a core exchange. If your not happy, send the cam back and ill refund you the full cost of the cam.

Anyone out there with dyno access and the motor to step up??

hit me back:

sales@kteller.com

thanks guys!

[too.slow.CB7]

i have easy dyno access...... how much will it cost and how much will you give me on the trade in?.......... PM me back -justin-

[kteller8]

if your interested shoot me an email, i am going to need your motor information, to see if you can or are eligable for this cam~

thanks

[HondaFan81]

Kteller8:

So let me get this right, you came out with a F22 VTEC cam (I assume regrind??). This specifically means it is only for F22b1 cylinder heads then. Correct? So your targets here on CB7tuner.com is for people that have swapped F22b1 motors or done the F22b1 head swap....right?

When will you offer a billet and/or cam regrind (that perhaps is better than Delta 272) for our F22a1/a4/a6 non-VTEC SOHC motors?

I'm interested and I plan to have my F22a1 head/F22a1 block all-motor build built by the end of this year. I have already purchased the Delta 272 regrind and will try this out first. If you come out with your version sometime, I would be glad to compare both and get them dynoed with everything else remaining the same on my setup. I am also planning to get a Ferrea valvetrain for my setup to take the higher RPMs no problem, so if you were to come out with a billet cam especially, I still could handle it.

If you want more details on my planned setup for this F22a1 motor, check this thread link out (first page, in middle it has my mod list):

http://www.cb7tuner.com/vbb/showthread.php?t=1029

Another idea is, if you want to find out how much your cam would gain over a stock-like setup with only basic I/H/E mods, I would be willing to pop these 3 mods on my 90 Accord EX 5-speed now (since I'll need them for my project anyhow) and test out your F22ax cam vs the commonly used Delta 272 regrind cam.

Let me know...