Today on www.hackaday.com they had a link to a write up for a homemade ITB system using Suzuki GSX-R throttle bodies. While it means nothing to me, I though some of you might be interested. http://www.homemadeturbo.com/tech_projects/itb/
-
on the stairs, she grabs my arm, says whats up,
where you been, is something wrong?
i try to just smile, and say everything’s fine. -
thats bad if they could write up a decent DIY ITB for our cars though it'll be hard for some of us to follow due to lack of experience on these kind of work(welding etc.) i wonder if they even have ITB's designed for our cars..
"
Fast and cheap won't be reliable
Cheap and reliable won't be fast.
And fast and reliable won't be cheap"
~EYCEE~ -
just do a h22 swap they have TWM ITBs for the h22Comment
-
PM me if you're interested....
http://www.cb7tuner.com/vbb/showthread.php?t=26198
I have a set of 2001 CBR F4i ITBs for sale..Comment
-
The fabbing part is actually pretty damn easy, just do some research into the entire subject before you start cutting and welding stuff though.
The real PITA part that requires alot of commitment is the tuning. Don't expect to just slap em on and drive to the dyno and get em tuned and you're all set. It is going to require alot of work, trial and error and research... or a shitload of money to have someone else do it.
You can actually have a manifold designed, which would require alot of money to setup the tooling... and the ITB's can be configured to work.
But any kind of prefabbed setup ios going to run you at least $1500 but more likely $2000+ once all is said and done and you still have to worry about engine management.SM4 CB3 ACCORD 2.0Si______________________________________________Comment
-
on the stairs, she grabs my arm, says whats up,
where you been, is something wrong?
i try to just smile, and say everything’s fine.Comment
-
wow that looks complicated, like really complicated. idk if many people would be willing to hack up their manifolds for that. Also, how does he filter the incoming air? Does he even have space for a filter? it looks really tight behind the ITBs. So for 180 bucks, I guess its nice, but yeah, if it were me, I'd have Bisimoto make them or something. Cus, he knows fluid dynamics and has a BSE degree in Engineering I think.
member's ride thread
93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
91 Accord SE 176k
97' Honda Odyssey 199k miles...$485 spare van for my parentsComment
-
Those ITBs actually worked just fine... Jeff is a friend of mine as is Dustin (whom recently sold that exact setup pictured, which is by the way for sale again). TWM or any others dont afford much more room for any air cleaers or anything... But It coulsd be made to work just fine... Unless you want to pay out the ass for some, i mean a lower intake is all of like 20 dollars at a junkyard ya dig???Originally posted by Losiracer2 View Post
Bisi isnt gonna give you something for free just for being on his nuts... Hes the man, but i wouldnt hold my breath waiting for him to produce a set.. Depending on your level of fab skill, your results will vary... Ive seen VERY VERY nice ones, and some I wouldnt put on a lawnmower...
750 WHP/575 TQ CD5 Raping a street near you....
realHomeMadeTurbo.com / Kaizenspeed.com / LSD Motorsports / Tempest Racing /SpeedFactory /ExplicitSpeedPerformance
GFI HOLLA!!!!!!
http://www.youtube.com/watch?v=Cdiz0k0RudwComment
-
it seems intresting thenx for the post
Comment
-
that info is all old. it was what convinced me to do the ITB's for my motor like 3 years ago. it's still not done
apparently OBX will be coming out with a set of ITB's. they make filters for everything, you can run them off the ITB's, off the stacks, get filters with built in velocity stacks or run an airbox.
remember to angle the runners upward so when you open the butterflies, you'll be looking at the back of the intake valve.Comment
-
is there an accord running a set of DIY ITB's anywhere?
Comment
-
Wedek and some other dude come to mind.
The New-ish Ride
My old Ride
Hear my Vtak!!!
MK3 Member #3
I piss off people for fun.
IA 08 Sunburn Victim #1Comment
-
Ghostaccord is doing the ITB's and I'm starting with it too. I'll try to post as many information as I can during the buildup. This week I'll start by cutting the intake manifold and welding the ITB's to it.
First I have a link with a good write up for our CB's.
http://www.honda-tech.com/zerothread?id=1938405
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
-
Originally posted by lo-specials View Post
man that guy has a nice setup and he is jumping from project to project.
on another note i wish i could just buy ITBs cuz i dont feel like doing all that work but i really want them. i wish wed3k would finish his alreadyMaple50175 - you're annoying =P
Brandoncb7 - I don't mean to come across like an ass but I see why you irritate Aaron now.
JoshM - Crotch rocket = chick magnet.Comment
-
i wish he would too...Originally posted by slick View Post man that guy has a nice setup and he is jumping from project to project.
on another note i wish i could just buy ITBs cuz i dont feel like doing all that work but i really want them. i wish wed3k would finish his alreadyComment
Comment