Ok, so I've just received my Moates HULOG data logging box and I've neatly installed the connection port in my ECU 
And I've been looking at Uberdata for a while and getting a feel for the program before I do anything.
I hooked everything up and set the USB controller to operate on COM3 and set the program to operate on COM3 and ..... nothing happens.
My RPM's say I'm at 51 and some other number stays the O2 numbers stay the same (something like 91). I've tried using Crome 1.5, Uberdata 1.66 and 1.7, ECTune, and ECU Control V5.8.40.
I've noticed that with Uberdata (the only one which does anything) I have to open up a ROM to get to the data logging selections.
Am I doing something wrong?
In Crome I think I have to buy the PRO license to get data logging features, but with the other programs I don't know what the heck is going on.
What came to my mind is that my soldering job was crummy. but when I leave the HULOG attached to my computer and disconnect the ECU, Uberdata does the exact same thing. I would expect it to read something like 0 for the RPMs and 0 for a lot of other things.
I feel like such a failure
but every thread and online article I read it's always been "yeah I plugged it in and it's FREAKIN AMAZING!!!!" Which really makes me want it to work.
And I've been looking at Uberdata for a while and getting a feel for the program before I do anything.I hooked everything up and set the USB controller to operate on COM3 and set the program to operate on COM3 and ..... nothing happens.
My RPM's say I'm at 51 and some other number stays the O2 numbers stay the same (something like 91). I've tried using Crome 1.5, Uberdata 1.66 and 1.7, ECTune, and ECU Control V5.8.40.
I've noticed that with Uberdata (the only one which does anything) I have to open up a ROM to get to the data logging selections.
Am I doing something wrong?
In Crome I think I have to buy the PRO license to get data logging features, but with the other programs I don't know what the heck is going on.What came to my mind is that my soldering job was crummy. but when I leave the HULOG attached to my computer and disconnect the ECU, Uberdata does the exact same thing. I would expect it to read something like 0 for the RPMs and 0 for a lot of other things.
I feel like such a failure
but every thread and online article I read it's always been "yeah I plugged it in and it's FREAKIN AMAZING!!!!" Which really makes me want it to work.