H22a With Turbonetics Kit????????

[godsider]

Hi, I recently picked up a turbonetics kit and now i have some questions for people that know about this stuff. My question is what injectors and Tuning program should i get?? Its either crome or hondata? Injector wise im thinking between RC Injectors or precision injectors? opinions are welcome for other products that might help me. The block and head is stock but the engine is strong and well taken care of.

Thanks!

[mozzandherb]

Hi, I recently picked up a turbonetics kit and now i have some questions for people that know about this stuff. My question is what injectors and Tuning program should i get?? Its either crome or hondata? Injector wise im thinking between RC Injectors or precision injectors? opinions are welcome for other products that might help me. The block and head is stock but the engine is strong and well taken care of.

Thanks!

I have RC 750cc injectors with my set-up. Also, make sure you have an upgraded clutch! Don't boost any more than 10psi and that's pushing it, I also have a stock h22a and it is also a healthy motor (knock on wood) and it is tuned very conservatively on 8psi. You migh have a problem with some of your gaskets and seals too! You won't know what to do until your finally boosted and then start leaking oil everywhere...that's when you know what seal needs changing. You can check my members ride thread to see all the parts I have! Have fun!

[F20A CB7]

^^^ good guy

[godsider]

Thanks for the advice! I still cant decide who is going to do the tune yet. One guy uses crome and charges like 250 the other guy does hondata only and that will run around a 1000. Yikes! But i wanna do it right. the guys i talk to say i should run 5-6 psi and would make around 260hp. but i dono. lol Is 750cc wat i should get or will 580cc do the job? Im finding it hard finding wat i need. If you have some links of some good places it would be great.
Thank you for your replys.

[verothacamaro]

Hi, I recently picked up a turbonetics kit and now i have some questions for people that know about this stuff. My question is what injectors and Tuning program should i get?? Its either crome or hondata? Injector wise im thinking between RC Injectors or precision injectors? opinions are welcome for other products that might help me. The block and head is stock but the engine is strong and well taken care of.

Thanks!

depends on what kind of turbo, what kind of boost, what kind of power you want to make...so on and so forth.

I'm getting 1600cc injectors because I'm going to be running e85, at about 15psi+

if you're planning on running no more than 8psi....stick with a safe choice and go for 550's. Especially if you plan on increasing boost later on.

You can use any management system really....Crome is great, as is Hondata

I prefer e-manage ultimate.

is this a USDM H22 or JDM?

are you going to be running pump fuel all of the time? or race fuel?

[godsider]

It is a JDM and i will be running premium fuel most the time unless at the track, (not often).

[godsider]

Okay, I was looking at injectors and now really confused I seen some people saying you need a resistor and some extra stuff. hmm i thought you just pluged them in like stock and used a program to tune them? I also cant figure out the difference between the different types? I really want precisions i decided but i cant find the right ones. i wanna make up to 300hp in the future, so what series do i need (525cc, 650cc ect)? can someone break me off some knowledge and maybe some links to good priced places to buy from.
Thanks guys

[mozzandherb]

Get some RC 750cc peak and hold injectors from Ebay, they will be fine and if you decide to go with more boost later on they will be good. And Ebay is your best bet to buy injectors

[godsider]

Sweet! What is all this talk about relays and stuff? do you just plug them in to the stock wiring and junk>?

[quickangel93]

750cc. you could use uberdata or hondata s300

[godsider]

Can someone please confirm that they are like factory as far as installation goes. so all i need to do is act like im putting a new set of stock ones in and use hondata to tune. no re wiring or extra hardware involved?

[quickangel93]

Can someone please confirm that they are like factory as far as installation goes. so all i need to do is act like im putting a new set of stock ones in and use hondata to tune. no re wiring or extra hardware involved?

you got to find yourself some plug and play ones. you probably need to drill out the holes bigger for the injectors.

[godsider]

Would you happen to have any helpful links?

[verothacamaro]

Would you happen to have any helpful links?

google.com

[godsider]

lol thanks dude