Announcement

Collapse

Please DO NOT Post In The General Section

From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.


The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.


For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.


Everyone will get a couple of warnings from here on out, after that I just start deleting threads.

Again if you have any questions, PM me or one of the other mods.
See more
See less

Turbo fuel system parts

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Turbo fuel system parts

    Just wondering what pumps and regulators you guys are all running. I am having a tough time finding application specific parts for my turbo H23. So far i only have my dsm blue tops, I still need a pump and regualtor.Are the 5th gen accord pumps the same (walbro 190 & 250lph)? Also I can only find the AEM regulator which is large and expensive, anyone running a remote universal regulator?
    Tags: None
    #2
    I'm using a Walboro 255lph, RC 750cc injectors for my fuel system along with a new fuel filter. I didn't see the need to use a FPR
    Last edited by mozzandherb; 09-18-2008, 12:12 AM.

    SOLD!!
    Boosted H22
    375whp 298 ft/lbs at 15psi
    MEMBERS RIDE THREAD<<<CLICK FOR VIDS AND COOL PICS

    Comment

      #3
      are you just using a universal in tank 190lph??

      Comment

        #4
        Originally posted by slammed_cb7 View Post
        are you just using a universal in tank 190lph??
        mine is for an 90-93 Accord application which can easily be found on Ebay

        SOLD!!
        Boosted H22
        375whp 298 ft/lbs at 15psi
        MEMBERS RIDE THREAD<<<CLICK FOR VIDS AND COOL PICS

        Comment

          #5
          running :
          walbro 255lph in-tank
          AEM fuel rail
          Precision 1000cc inj
          Aeromotive FPR


          Formerly 91AccordExR33
          11.68 @ 127mph
          417whp/375wtq
          Sold: 8/2016

          Comment

            #6
            with my fuel setup,i got
            walbro 255lph in-tank
            AEM fuel rail and AEM FPR
            Precision 1000cc injectors
            B&M fuel pressure gauge


            you should be fine with your stock Fuel Rail/ FPR
            just upgrade your injectors as you already did and the fuel pump .
            having a fuel pressure gauge is also a good thing


            -->751 whp @ 27psi <--...Midnight Tuning <----

            Comment

              #7
              I forgot to add i have a B&M fuel pressure guage. The stock FPR has the flow capacity to keep me at stock(ish) fuel pressure I assume with a 190 or 255lph pump?

              Comment

              Previous template Next
              Working...
              X