what else will i need?

[LowNknoxville]

So im going to check this kit out tommorrow. first of all what should i check for as far as slop in the turbo, wear and tear? and also what else will i need to make this kit work for my f22 besides a new manifold? Will this kit work well on a stock block. PEACE help. Here is the link! PEACE
http://knoxville.craigslist.org/pts/1009084884.html

[ztinaldoz]

- you will need a engine management.. like hondata s300 or something.. og just map it, brn it on a chip, and place it in your ecu..
- you need a better clutch, that can hold the hp you will get..
- injectors
- intercooler piping
gauges
- oil filter sandwich/adapter for oil outlet to the turbo, and for the oilpressure gauge
- Catch-can can be good to have
- BOV pipe adapter
- better fuelpump (walbro 255lb etc)
- Boost controller (electronic is the best way to go here)

[LowNknoxville]

how much will all that run me? PEACE

[93_f22aky]

that turbo looks like a ebay knock off make shere it says garret on it and u might want a new wastgate cuz it might be a hks look alike not a real hks


and all that stuff ^^^ will cost anywhere from 500 bones to a 1000

[T04ECB7]

that turbo looks like a ebay knock off make shere it says garret on it and u might want a new wastgate cuz it might be a hks look alike not a real hks


and all that stuff ^^^ will cost anywhere from 500 bones to a 1000

or more...HONDATA s300 in the end costs aroun $700-$800...you can use the wg.. just put a tial spring in it... make sure it is a decent turbo too. there is a company that actually sells the ic pipe kit for like $280 i think but it coul be lower...turbo doesnt have to be a Garret to be a good turbo.. i have a master power and i have seen a few run on race cars and they hold up just as good as garret..if not better... you can find injectors for a decent price too.. dep22build has some percision 680cc for $180 i think..

[93_f22aky]

or more...HONDATA s300 in the end costs aroun $700-$800...you can use the wg.. just put a tial spring in it... make sure it is a decent turbo too. there is a company that actually sells the ic pipe kit for like $280 i think but it coul be lower...turbo doesnt have to be a Garret to be a good turbo.. i have a master power and i have seen a few run on race cars and they hold up just as good as garret..if not better... you can find injectors for a decent price too.. dep22build has some percision 680cc for $180 i think..

ya i no u dont have to have garrett turbo but in the ad it says garrette not garrett and garrette is a knock off garrett turbo and ya it would be like 2k more for a good clutch engein man. and other parts i dont think that down pipe will work eather unless u dont have a ac compresser

[LowNknoxville]

thanks, i talked to the guy before i went to meet him and he said he bought it from ebay. sooo. i told him no thanks. Thanks for the heads up. PEACE

[93_f22aky]

yep yep atleast he wasnt trying to bs u or anything