uberdata base maps

[Backfire32]

i've almost got everything i need to turbo my f22 except a few things and most importantly the the chiped po6 ecu to run uberdata. i know at one point i found a base map made for the car on this forum but can't find it now. im still thinking of chipping it myself or sending it in to the moates to be chiped for the $25. but anyways im looking for the maps for the f22 turbo setup so i can boost 8lbs when i do get everything ready. Last resort " is anyone selling a chiped p06, if so how much.

[92ex]

i've almost got everything i need to turbo my f22 except a few things and most importantly the the chiped po6 ecu to run uberdata. i know at one point i found a base map made for the car on this forum but can't find it now. im still thinking of chipping it myself or sending it in to the moates to be chiped for the $25. but anyways im looking for the maps for the f22 turbo setup so i can boost 8lbs when i do get everything ready. Last resort " is anyone selling a chiped p06, if so how much.

Talk to midniteracerx, he can chip you an ecu and get you a basemap.

[MRX]

http://home.comcast.net/~ndd3d/turbof22v5.bin

too bad i'm on like turbof22v11 now

[busychild0]

i have a question about the chipped ecu and the f22a6 manifold... if i get a chipped ecu and a turbo map made for my car.. can it be made to work with the f22a6 intake manifold?

[MRX]

i have a question about the chipped ecu and the f22a6 manifold... if i get a chipped ecu and a turbo map made for my car.. can it be made to work with the f22a6 intake manifold?

it will if u can make me get off my lazy ass and wire mine up to confirm it...go ahead do your best

[BustedLX]

i have a question about the chipped ecu and the f22a6 manifold... if i get a chipped ecu and a turbo map made for my car.. can it be made to work with the f22a6 intake manifold?

that manifold is the bottleneck in your turbo setup... lose it and you will make more linear power.

[MRX]

that manifold is the bottleneck in your turbo setup... lose it and you will make more linear power.

your thoughts/experience with a6 runners and h23 plenum?

[Backfire32]

thanx midnite! At least i have a good starting point to tune my turbo setup.

[c mak]

What program do you have to have to view the map? Do you have to already have uberdata? I tried to open it to view it and it said that there was not a program on this computer that will allow me to view the map.

[busychild0]

is the a6 mani. bottleneck only when the butterflies are closed? what if the butterflies were stuck open on a turbo app. would that be any gain over a reg mani.?

[gdout90accord]

that manifold is the bottleneck in your turbo setup... lose it and you will make more linear power.

hey so you saying the a6 manifold is not good on our turbo app? so which one would be better a1 or f22bdohc/h23 manifold? cuz im gonna be buying some1s f22b/h23 intake manifold next month.

[ZigenBallZ]

A ported A1 mani would be the best...

[90boostdaccord]

when do we all get to see the latest map midnite??

[MRX]

when do we all get to see the latest map midnite??

when i tune it some more...check the stickied chipped ecu thread every now and again cause thats where i'll post it. I switched back to 1.66 cause my map on 1.7 is running so rich in partial throttle its nauseating (sp?). Might get around to it this weekend...stay tuned

[Accord_droccA]

I read on a another forum that removing the second butterflys for a force induction setup helps you gain more power? So there will be a constant of 8 air flowing ports in the manifold.