Announcement

Collapse

Please DO NOT Post In The General Section

From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.


The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.


For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.


Everyone will get a couple of warnings from here on out, after that I just start deleting threads.

Again if you have any questions, PM me or one of the other mods.
See more
See less

14b cold side and t25 exhaust

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    14b cold side and t25 exhaust

    ok so i blew the shit up out mt t25/28.got a 14b for $50.but its the cold side and center piece onlything missin is the exhaust housing.i kno the t25 hot side fits as i already did this.so here is my question with the t25 hot side will this turbo still put out and function like the 14b?what exactly performance wize changed with this set up?

    my new turbo build
    Tags: None
    #2
    Originally posted by 92smokeaccord View Post
    ok so i blew the shit up out mt t25/28.got a 14b for $50.but its the cold side and center piece onlything missin is the exhaust housing.i kno the t25 hot side fits as i already did this.so here is my question with the t25 hot side will this turbo still put out and function like the 14b?what exactly performance wize changed with this set up?
    TD05 housing is bigger on the 14b, spools the compressor better. My guess is the exhaust housing will not turbo the turbine fast enough to compress the air needed to hold boost through the RPM range.


    Why not get a complete 14b turbo? They can be had used for like $100 bux in good condition. Your going to spend that much on a rebuild and balance for your "experiment" anyways.

    Really im not sure about this though, ive never played with a T25. Generally, ive just thrown them away.
    Originally posted by wed3k
    im a douchebag to people and i don't even own a lambo. whats your point? we, douchbags, come in all sorts of shapes and colours.

    Comment

      #3
      Originally posted by toycar View Post
      TD05 housing is bigger on the 14b, spools the compressor better. My guess is the exhaust housing will not turbo the turbine fast enough to compress the air needed to hold boost through the RPM range.


      Why not get a complete 14b turbo? They can be had used for like $100 bux in good condition. Your going to spend that much on a rebuild and balance for your "experiment" anyways.

      Really im not sure about this though, ive never played with a T25. Generally, ive just thrown them away.
      was in a bad bind and had to go this route.also your right cant get this thing to boost past 5psi.but spins almost instaly.
      Last edited by 92smokeaccord; 02-27-2012, 04:40 PM.

      my new turbo build

      Comment

      Previous template Next
      Working...
      X